2012 Chrysler 300 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Chrysler 300, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 24 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2012 300 — Year-Specific Fitment Context
The 2012 Chrysler 300 is in year 8 of 19 using the 5x115 pattern (2005–2023). Wheels from any 2005–2023 Chrysler 300 are cross-compatible with the 2012 model. Across its full production run (1999–2023), the 300 has also used: 5x114.3.
Chrysler 300 Bolt Pattern by Year
The table below shows how the 300's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 5x114.3 | 71.6 | 40 |
| 2005 | 5x115 | 71.6 | 24 |
| 2006 | 5x115 | 71.6 | 24 |
| 2007 | 5x115 | 71.6 | 24 |
| 2008 | 5x115 | 71.6 | 24 |
| 2009 | 5x115 | 71.6 | 24 |
| 2010 | 5x115 | 71.6 | 24 |
| 2011 | 5x115 | 71.6 | 24 |
| ▸ 2012 | 5x115 | 71.6 | 24 |
| 2013 | 5x115 | 71.6 | 24 |
| 2014 | 5x115 | 71.6 | 24 |
| 2015 | 5x115 | 71.6 | 24 |
| 2016 | 5x115 | 71.6 | 24 |
| 2017 | 5x115 | 71.6 | 24 |
| 2018 | 5x115 | 71.5 | 24 |
| 2019 | 5x115 | 71.5 | 24 |
| 2020 | 5x115 | 71.5 | 24 |
| 2021 | 5x115 | 71.5 | 24 |
| 2022 | 5x115 | 71.5 | 24 |
| 2023 | 5x115 | 71.5 | 24 |
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2012 Chrysler 300
The 2012 Chrysler 300 uses a 5x115 bolt pattern with a 71.6mm center bore. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore; otherwise, vibrations may occur. The factory offset is 24mm; deviations beyond ±5mm can cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.50) and seat type—use conical (60-degree) or ball-seat nuts as required by the wheel. Avoid mixing lug nut types. Wheels from 2005–2023 Chrysler 300 models are direct fit, but note that earlier 300s (1999–2004) use 5x114.3, which is incompatible without adapters.
Historical Fitment Data Reference
In our dataset, Chrysler 300 appears from 1999 to 2023 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x115).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 16.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Check inner clearance for aftermarket wheels; the 24mm offset is tight, and wider wheels may contact struts or suspension components.
- ✅ Verify that aftermarket wheels include hub-centric rings for the 71.6mm bore; otherwise, vibrations and stress on studs may occur.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Chrysler 300 — Frequently Asked Questions
What is the bolt pattern for a 2012 Chrysler 300?
The 2012 Chrysler 300 uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 24mm.
What other years of Chrysler 300 have the same bolt pattern as the 2012?
The Chrysler 300 uses the 5x115 pattern from 2005 through 2023. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What is the factory wheel offset for a 2012 Chrysler 300?
The OEM offset for the 2012 300 is typically around 24mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2012 Chrysler 300 use?
The 2012 Chrysler 300 uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2012 Chrysler 300s use lug bolts or lug nuts?
The 2012 300 requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2012 Chrysler 300?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 24mm, and a center bore of at least 71.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset