2018 Chrysler Pacifica Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Chrysler Pacifica, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 41 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2018 Pacifica — Year-Specific Fitment Context
The 2018 Chrysler Pacifica is in year 15 of 21 using the 5x127 pattern (2004–2024). Wheels from any 2004–2024 Chrysler Pacifica are cross-compatible with the 2018 model.
Chrysler Pacifica Bolt Pattern by Year
The table below shows how the Pacifica's wheel specifications have changed over the years. The 2018 model year is highlighted.
Fitment Notes
The 2018 Chrysler Pacifica has a bolt pattern of 5x127.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5".
This means it is a 5 lug pattern with a circle diameter of 127mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Chrysler Pacifica appears from 2004 to 2024 (13 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 9.0 mm
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
2018 Chrysler Pacifica — Frequently Asked Questions
What is the bolt pattern for a 2018 Chrysler Pacifica?
The 2018 Chrysler Pacifica uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 41mm.
What other years of Chrysler Pacifica have the same bolt pattern as the 2018?
The Chrysler Pacifica uses the 5x127 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What is the center bore of a 2018 Chrysler Pacifica?
The factory center bore (hub bore) for the 2018 Chrysler Pacifica is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2018 Chrysler Pacifica?
The OEM offset for the 2018 Pacifica is typically around 41mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2018 Chrysler Pacifica?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 71.6mm center bore important for the 2018 Pacifica?
The 71.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Chrysler Pacifica is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2004-2024 (13 model years).
- Observed bolt-pattern variants: 1 (5x127).
- Observed total offset span across years: 9.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2018 Chrysler Pacifica, please report it via our About page contact so we can verify and update this record.