2025 Chrysler Pacifica Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Chrysler Pacifica is 5x127 (5x5"). It has a center bore of 71.6 mm, an offset range of 40-50, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2025 Chrysler Pacifica Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Center Bore (Hub Bore) | 71.6 mm |
| Offset Range (ET) | 40-50 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
2025 Pacifica — Year-Specific Fitment Context
The 2025 Chrysler Pacifica is in year 20 of 21 using the 5x127 pattern (2006–2026). Wheels from any 2006–2026 Chrysler Pacifica are cross-compatible with the 2025 model. Across its full production run (2004–2026), the Pacifica has also used: 5x114.3.
Chrysler Pacifica Bolt Pattern by Year
Looking for all generations? View the complete Chrysler Pacifica (2004–2026) Bolt Pattern & Generation Guide →
The table below shows how the Pacifica's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 5x114.3 | 71.5 | 46 |
| 2005 | 5x114.3 | 71.5 | 46 |
| 2006 | 5x127 | 71.5 | 46 |
| 2007 | 5x127 | 71.5 | 46 |
| 2008 | 5x127 | 71.5 | 46 |
| 2017 | 5x127 | 71.5 | 41 |
| 2018 | 5x127 | 71.5 | 41 |
| 2019 | 5x127 | 71.5 | 50 |
| 2020 | 5x127 | 71.5 | 50 |
| 2021 | 5x127 | 71.5 | 50 |
| 2022 | 5x127 | 71.5 | 50 |
| 2023 | 5x127 | 71.5 | 50 |
| 2024 | 5x127 | 71.6 | 50 |
| ▸ 2025 | 5x127 | 71.6 | 40-50 |
| 2026 | 5x127 | 71.6 | 40-50 |
2025 Chrysler Pacifica Wheel Interchange & Donor Fitment Guide (5x127)
The 5x127 bolt pattern is shared by 295 vehicles in our database (moderately common). For safe wheel swaps on the 2025 Chrysler Pacifica, donor rims must match the 5x127 PCD and have a center bore of at least 71.6 mm:
DIRECT HUB MATCH Same 5x127 Pattern & Exact 71.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2019 Chrysler Pacifica Hybrid | 71.5 mm (Exact) | 50 | 12x1.5 (Cone) |
| 2009 Chrysler Town & Country | 71.6 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 2020 Chrysler Voyager | 71.5 mm (Exact) | 40-50mm | M14x1.5 (Cone) |
| 2024 Dodge Charger | 71.6 mm (Exact) | 18-25 | 14x1.5 (Cone) |
| 2012 Dodge Durango | 71.6 mm (Exact) | 53 | N 1/2" (20 UNF) (Cone) |
| 2009 Dodge Grand Caravan Cargo | 71.6 mm (Exact) | 40 | N 12x1.50 (Cone) |
HUB RING FITMENT Same 5x127 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Cadillac Fleetwood | 78.3 mm | 78.3mm → 71.6mm |
12 |
| 1992 Land Rover Range Rover | 78.1 mm | 78.1mm → 71.6mm |
50 |
| 1992 Oldsmobile Custom Cruiser | 78.3 mm | 78.3mm → 71.6mm |
12 |
| 1992 Buick Roadmaster | 78.3 mm | 78.3mm → 71.6mm |
12 |
| 1992 Chevrolet Astro Cargo | 78.1 mm | 78.1mm → 71.6mm |
0 |
| 1992 Chevrolet Astro Passenger | 78.1 mm | 78.1mm → 71.6mm |
0 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Chrysler Pacifica — Frequently Asked Questions
What is the bolt pattern for a 2025 Chrysler Pacifica?
The 2025 Chrysler Pacifica uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40-50mm.
What other years of Chrysler Pacifica have the same bolt pattern as the 2025?
The Chrysler Pacifica uses the 5x127 pattern from 2006 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the factory wheel offset for a 2025 Chrysler Pacifica?
The OEM offset for the 2025 Pacifica is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2025 Chrysler?
The 2025 Pacifica uses a 5x127 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2025 Chrysler Pacifica?
The factory center bore (hub bore) for the 2025 Chrysler Pacifica is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 71.6mm center bore important for the 2025 Pacifica?
The 71.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →