2007 Chrysler Pacifica Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Chrysler Pacifica, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x127 (5x5")
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 71.6 mm
Offset (ET) 46
Torque Specs 80 ft-lbs (108 Nm)

2007 Pacifica — Year-Specific Fitment Context

The 2007 Chrysler Pacifica is in year 4 of 21 using the 5x127 pattern (2004–2024). Wheels from any 2004–2024 Chrysler Pacifica are cross-compatible with the 2007 model.

Chrysler Pacifica Bolt Pattern by Year

The table below shows how the Pacifica's wheel specifications have changed over the years. The 2007 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2004 5x127 71.6 46
2005 5x127 71.6 46
2006 5x127 71.6 46
▸ 2007 5x127 71.6 46
2008 5x127 71.6 46
2017 5x127 71.6 41
2018 5x127 71.6 41
2019 5x127 71.5 50
2020 5x127 71.5 50
2021 5x127 71.5 50
2022 5x127 71.5 50
2023 5x127 71.5 50
2024 5x127 71.5 50

Fitment Notes

The 2007 Chrysler Pacifica has a bolt pattern of 5x127.

Imperial Conversion: This bolt pattern is commonly referred to as 5x5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5".

This means it is a 5 lug pattern with a circle diameter of 127mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Chrysler Pacifica appears from 2004 to 2024 (13 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x127 Pattern Context

This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.

Examples of other vehicles using 5x127:

2007 Chrysler Pacifica — Frequently Asked Questions

What is the bolt pattern for a 2007 Chrysler Pacifica?

The 2007 Chrysler Pacifica uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 46mm.

What other years of Chrysler Pacifica have the same bolt pattern as the 2007?

The Chrysler Pacifica uses the 5x127 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.

How do I measure the bolt pattern on my 2007 Chrysler?

The 2007 Pacifica uses a 5x127 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

How tight should I torque the lug nuts on a 2007 Chrysler Pacifica?

Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the PCD for a 2007 Chrysler Pacifica?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Pacifica, the PCD is 5x127.

Can I put aftermarket wheels on my 2007 Chrysler Pacifica?

Absolutely. Just ensure the aftermarket wheels have a 5x127 bolt pattern, an offset near 46mm, and a center bore of at least 71.6mm (using hub rings if larger).

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Chrysler Pacifica is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2007 Chrysler Pacifica, please report it via our About page contact so we can verify and update this record.

Chrysler Pacifica By Year

2004 2005 2006 2007 2008 2017 2018 2019 2020 2021 2022 2023 2024

Other Chrysler Models

200 300 300M Aspen Cirrus Concorde Crossfire Fifth Ave Grand Voyager Imperial LHS LeBaron New Yorker PT Cruiser Pacifica Pacifica Hybrid Prowler Sebring Town & Country Voyager