2001 Chrysler Voyager Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Chrysler Voyager, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2001 Voyager — Year-Specific Fitment Context
The 2001 Chrysler Voyager is in year 2 of 4 using the 5x114.3 pattern (2000–2003). Wheels from any 2000–2003 Chrysler Voyager are cross-compatible with the 2001 model. Across its full production run (2000–2022), the Voyager has also used: 5x127.
Chrysler Voyager Bolt Pattern by Year
The table below shows how the Voyager's wheel specifications have changed over the years. The 2001 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2001 Chrysler Voyager
For your 2001 Chrysler Voyager, the correct bolt pattern is 5x114.3 with a center bore of 71.6mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 40mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree) to guarantee safe clamping force. Never mix lug nut types. Verify that wheels are load-rated for your vehicle's weight. Improper fitment can lead to wheel separation or brake interference.
Historical Fitment Data Reference
In our dataset, Chrysler Voyager appears from 2000 to 2022 (7 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ If using aftermarket wheels, check that the wheel's hub bore is at least 71.6mm; use hub-centric rings if larger.
- ✅ Avoid wheels with offset below 35mm or above 45mm to prevent rubbing on suspension or body panels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Chrysler Voyager — Frequently Asked Questions
What is the bolt pattern for a 2001 Chrysler Voyager?
The 2001 Chrysler Voyager uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Chrysler Voyager have the same bolt pattern as the 2001?
The Chrysler Voyager uses the 5x114.3 pattern from 2000 through 2003. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2001 Chrysler?
The 2001 Voyager uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2001 Chrysler Voyager use?
The 2001 Chrysler Voyager uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2001 Chrysler Voyagers use lug bolts or lug nuts?
The 2001 Voyager requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Chrysler fit my 2001 Voyager?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.6mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset