2021 Chrysler Voyager Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Chrysler Voyager, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 40-50mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
2021 Voyager — Year-Specific Fitment Context
The 2021 Chrysler Voyager is in year 2 of 3 using the 5x127 pattern (2020–2022). Wheels from any 2020–2022 Chrysler Voyager are cross-compatible with the 2021 model. Across its full production run (2000–2022), the Voyager has also used: 5x114.3.
Chrysler Voyager Bolt Pattern by Year
The table below shows how the Voyager's wheel specifications have changed over the years. The 2021 model year is highlighted.
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
Expert Buying Guide for 2021 Chrysler Voyager
For your 2021 Chrysler Voyager, the 5x127 bolt pattern and 71.5mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is 40-50mm; deviating can cause rubbing or clearance issues. Always use M14x1.5 lug nuts with the correct seat (cone or ball) matching the wheel. Improper seating can lead to wheel loss. Verify wheel load rating meets or exceeds OEM specs. Cross-compatible with 2020–2022 Voyager models.
Historical Fitment Data Reference
In our dataset, Chrysler Voyager appears from 2000 to 2022 (7 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using wheels from 5x114.3 pattern Voyagers (pre-2020) without proper adapters.
- ✅ Check inner clearance for brake calipers when using wheels with offset near 40mm.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Chrysler Voyager — Frequently Asked Questions
What is the bolt pattern for a 2021 Chrysler Voyager?
The 2021 Chrysler Voyager uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 40-50mmmm.
What other years of Chrysler Voyager have the same bolt pattern as the 2021?
The Chrysler Voyager uses the 5x127 pattern from 2020 through 2022. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
What is the center bore of a 2021 Chrysler Voyager?
The factory center bore (hub bore) for the 2021 Chrysler Voyager is 71.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2021 Chrysler Voyager?
Refer to your owner's manual for exact specs, but always tighten the M14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2021 Chrysler Voyager use?
The 2021 Chrysler Voyager uses M14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 40-50mmmm offset mean for the 2021 Voyager?
An offset of 40-50mmmm means the wheel's mounting surface is 40-50mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chrysler.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset