2002 Chrysler Voyager Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Chrysler Voyager, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2002 Voyager — Year-Specific Fitment Context
The 2002 Chrysler Voyager is in year 3 of 4 using the 5x114.3 pattern (2000–2003). Wheels from any 2000–2003 Chrysler Voyager are cross-compatible with the 2002 model. Across its full production run (2000–2022), the Voyager has also used: 5x127.
Chrysler Voyager Bolt Pattern by Year
The table below shows how the Voyager's wheel specifications have changed over the years. The 2002 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2002 Chrysler Voyager
When selecting aftermarket wheels for your 2002 Chrysler Voyager, the 71.6mm center bore is critical. Most aftermarket wheels have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 40mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can cause wheel separation. Cross-compatible wheels from 2000–2003 Voyager models fit directly. Verify bolt pattern 5x114.3 and avoid 5x127 wheels from later years.
Historical Fitment Data Reference
In our dataset, Chrysler Voyager appears from 2000 to 2022 (7 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to maintain clamping force.
- ✅ If using aftermarket wheels, always install hub-centric rings to match the 71.6mm bore.
- ✅ Check that aftermarket wheels have sufficient clearance for the brake calipers, as some designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Chrysler Voyager — Frequently Asked Questions
What is the bolt pattern for a 2002 Chrysler Voyager?
The 2002 Chrysler Voyager uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Chrysler Voyager have the same bolt pattern as the 2002?
The Chrysler Voyager uses the 5x114.3 pattern from 2000 through 2003. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What lug nut size does the 2002 Chrysler Voyager use?
The 2002 Chrysler Voyager uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2002 Chrysler Voyager?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 71.6mm (using hub rings if larger).
What is the center bore of a 2002 Chrysler Voyager?
The factory center bore (hub bore) for the 2002 Chrysler Voyager is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2002 Chrysler Voyager?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2002 Voyager, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset