1995 Dodge Intrepid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Dodge Intrepid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 41 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1995 Intrepid — Year-Specific Fitment Context
The 1995 Dodge Intrepid is in year 3 of 12 using the 5x114.3 pattern (1993–2004). Wheels from any 1993–2004 Dodge Intrepid are cross-compatible with the 1995 model.
Dodge Intrepid Bolt Pattern by Year
The table below shows how the Intrepid's wheel specifications have changed over the years. The 1995 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1995 Dodge Intrepid
For your 1995 Dodge Intrepid, the bolt pattern is 5x114.3mm, but the center bore is a critical 71.6mm. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 41mm; staying within ±5mm is recommended to avoid rubbing or bearing stress. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a cone seat, while aftermarket may require ball or flat seats. Mismatched lug nuts can cause wheel separation. Verify lug nut engagement (at least 6 full turns) and torque to 95-105 ft-lbs. Never reuse old lug nuts on new wheels.
Historical Fitment Data Reference
In our dataset, Dodge Intrepid appears from 1993 to 2004 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel settling.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed; plastic rings are fine for street use, but aluminum is better for track.
- ✅ Avoid wheels with offset below 35mm (too aggressive) as they may rub the fender or suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Dodge Intrepid — Frequently Asked Questions
What is the bolt pattern for a 1995 Dodge Intrepid?
The 1995 Dodge Intrepid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 41mm.
What other years of Dodge Intrepid have the same bolt pattern as the 1995?
The Dodge Intrepid uses the 5x114.3 pattern from 1993 through 2004. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
Why is matching the 71.6mm center bore important for the 1995 Intrepid?
The 71.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 1995 Dodge Intrepid?
The factory center bore (hub bore) for the 1995 Dodge Intrepid is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 1995 Dodge Intrepid?
The OEM offset for the 1995 Intrepid is typically around 41mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 41mm offset mean for the 1995 Intrepid?
An offset of 41mm means the wheel's mounting surface is 41mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Dodge.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset