2000 Dodge Intrepid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Dodge Intrepid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 41 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 Intrepid — Year-Specific Fitment Context
The 2000 Dodge Intrepid is in year 8 of 12 using the 5x114.3 pattern (1993–2004). Wheels from any 1993–2004 Dodge Intrepid are cross-compatible with the 2000 model.
Dodge Intrepid Bolt Pattern by Year
The table below shows how the Intrepid's wheel specifications have changed over the years. The 2000 model year is highlighted.
Fitment Notes
The 2000 Dodge Intrepid has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Dodge Intrepid appears from 1993 to 2004 (12 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2000 Dodge Intrepid — Frequently Asked Questions
What is the bolt pattern for a 2000 Dodge Intrepid?
The 2000 Dodge Intrepid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 41mm.
What other years of Dodge Intrepid have the same bolt pattern as the 2000?
The Dodge Intrepid uses the 5x114.3 pattern from 1993 through 2004. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2000 Dodge?
The 2000 Intrepid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2000 Dodge Intrepid?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 41mm, and a center bore of at least 71.6mm (using hub rings if larger).
What is the PCD for a 2000 Dodge Intrepid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Intrepid, the PCD is 5x114.3.
Can I use spacers on my 2000 Dodge Intrepid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 71.6mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Dodge Intrepid is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1993-2004 (12 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2000 Dodge Intrepid, please report it via our About page contact so we can verify and update this record.