1994 Dodge Intrepid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Dodge Intrepid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 41 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1994 Intrepid — Year-Specific Fitment Context
The 1994 Dodge Intrepid is in year 2 of 12 using the 5x114.3 pattern (1993–2004). Wheels from any 1993–2004 Dodge Intrepid are cross-compatible with the 1994 model.
Dodge Intrepid Bolt Pattern by Year
The table below shows how the Intrepid's wheel specifications have changed over the years. The 1994 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1994 Dodge Intrepid
For your 1994 Dodge Intrepid, the bolt pattern is 5x114.3mm with a critical center bore of 71.6mm. Aftermarket wheels often have a larger bore, so hub-centric rings (71.6mm to wheel bore) are mandatory to prevent vibration and ensure proper load transfer. The factory offset is 41mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a conical (60-degree) seat. Never mix seat types; improper lug nuts can loosen or damage the wheel. Verify that aftermarket wheels are hub-centric or use rings, and re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Dodge Intrepid appears from 1993 to 2004 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50 miles of driving, as wheels can settle.
- ✅ Avoid wheels with offset below 35mm or above 45mm to prevent rubbing on struts or fenders.
- ✅ When using hub-centric rings, ensure they are made of metal (not plastic) for durability and heat resistance.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Dodge Intrepid — Frequently Asked Questions
What is the bolt pattern for a 1994 Dodge Intrepid?
The 1994 Dodge Intrepid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 41mm.
What other years of Dodge Intrepid have the same bolt pattern as the 1994?
The Dodge Intrepid uses the 5x114.3 pattern from 1993 through 2004. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
Will wheels from another Dodge fit my 1994 Intrepid?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.6mm.
What is the factory wheel offset for a 1994 Dodge Intrepid?
The OEM offset for the 1994 Intrepid is typically around 41mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 1994 Dodge Intrepid use?
The 1994 Dodge Intrepid uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 1994 Dodge Intrepid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 71.6mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset