2002 Dodge Ram 3500 Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Dodge Ram 3500 Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 121.3 mm |
| Offset (ET) | 43 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2002 Ram 3500 Regular Cab — Year-Specific Fitment Context
The 2002 Dodge Ram 3500 Regular Cab is in year 9 of 17 using the 8x165.1 pattern (1994–2010). Wheels from any 1994–2010 Dodge Ram 3500 Regular Cab are cross-compatible with the 2002 model.
Dodge Ram 3500 Regular Cab Bolt Pattern by Year
The table below shows how the Ram 3500 Regular Cab's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 8x165.1 | 121.3 | 43 |
| 1995 | 8x165.1 | 121.3 | 43 |
| 1996 | 8x165.1 | 121.3 | 43 |
| 1997 | 8x165.1 | 121.3 | 43 |
| 1998 | 8x165.1 | 121.3 | 43 |
| 1999 | 8x165.1 | 121.3 | 43 |
| 2000 | 8x165.1 | 121.3 | 43 |
| 2001 | 8x165.1 | 121.3 | 43 |
| ▸ 2002 | 8x165.1 | 121.3 | 43 |
| 2003 | 8x165.1 | 121.3 | 43 |
| 2004 | 8x165.1 | 121.3 | 43 |
| 2005 | 8x165.1 | 121.3 | 43 |
| 2006 | 8x165.1 | 121.3 | 43 |
| 2007 | 8x165.1 | 121.3 | 43 |
| 2008 | 8x165.1 | 121.3 | 43 |
| 2009 | 8x165.1 | 121.3 | 43 |
| 2010 | 8x165.1 | 121.3 | 43 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2002 Dodge Ram 3500 Regular Cab
For your 2002 Dodge Ram 3500 Regular Cab, the 8x165.1 bolt pattern is shared across 1994–2010 models. The critical center bore is 121.3mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: stock is 43mm. Sticking within ±10mm maintains proper scrub radius and clearance. Use only 9/16" lug nuts with the correct thread pitch (9/16-18) and seat type—factory uses cone seat. Never use ball seat or incorrect thread pitch, as this can cause wheel loss. Always torque to manufacturer specs (typically 135-145 ft-lbs) and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Dodge Ram 3500 Regular Cab appears from 1994 to 2010 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, verify hub bore and install hub-centric rings if bore > 121.3mm.
- ✅ Avoid wheels with offset below 33mm or above 53mm to prevent rubbing or bearing stress.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Dodge Ram 3500 Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2002 Dodge Ram 3500 Regular Cab?
The 2002 Dodge Ram 3500 Regular Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is 43mm.
What other years of Dodge Ram 3500 Regular Cab have the same bolt pattern as the 2002?
The Dodge Ram 3500 Regular Cab uses the 8x165.1 pattern from 1994 through 2010. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2002 Dodge Ram 3500 Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 9/16 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2002 Dodge Ram 3500 Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2002 Ram 3500 Regular Cab, the PCD is 8x165.1.
What is the factory wheel offset for a 2002 Dodge Ram 3500 Regular Cab?
The OEM offset for the 2002 Ram 3500 Regular Cab is typically around 43mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 121.3mm center bore important for the 2002 Ram 3500 Regular Cab?
The 121.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset