2006 Dodge Ram 3500 Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Dodge Ram 3500 Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 121.3 mm |
| Offset (ET) | 43 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2006 Ram 3500 Regular Cab — Year-Specific Fitment Context
The 2006 Dodge Ram 3500 Regular Cab is in year 13 of 17 using the 8x165.1 pattern (1994–2010). Wheels from any 1994–2010 Dodge Ram 3500 Regular Cab are cross-compatible with the 2006 model.
Dodge Ram 3500 Regular Cab Bolt Pattern by Year
The table below shows how the Ram 3500 Regular Cab's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 8x165.1 | 121.3 | 43 |
| 1995 | 8x165.1 | 121.3 | 43 |
| 1996 | 8x165.1 | 121.3 | 43 |
| 1997 | 8x165.1 | 121.3 | 43 |
| 1998 | 8x165.1 | 121.3 | 43 |
| 1999 | 8x165.1 | 121.3 | 43 |
| 2000 | 8x165.1 | 121.3 | 43 |
| 2001 | 8x165.1 | 121.3 | 43 |
| 2002 | 8x165.1 | 121.3 | 43 |
| 2003 | 8x165.1 | 121.3 | 43 |
| 2004 | 8x165.1 | 121.3 | 43 |
| 2005 | 8x165.1 | 121.3 | 43 |
| ▸ 2006 | 8x165.1 | 121.3 | 43 |
| 2007 | 8x165.1 | 121.3 | 43 |
| 2008 | 8x165.1 | 121.3 | 43 |
| 2009 | 8x165.1 | 121.3 | 43 |
| 2010 | 8x165.1 | 121.3 | 43 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2006 Dodge Ram 3500 Regular Cab
For your 2006 Dodge Ram 3500 Regular Cab, the 8x165.1 bolt pattern is shared with 1994–2010 models, ensuring broad cross-compatibility. However, the 121.3mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory 43mm offset maintains correct scrub radius and suspension geometry. Using wheels with offset outside 35–50mm may cause rubbing or bearing wear. Always use 9/16" lug nuts with the correct thread pitch (9/16-18) and seat type—factory wheels use cone seats; aftermarket may require ball or shank nuts. Improper seating can lead to wheel loss. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Dodge Ram 3500 Regular Cab appears from 1994 to 2010 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 35mm or above 50mm to prevent clearance issues with brakes and suspension.
- ✅ If using aftermarket wheels, always install hub-centric rings (OD 121.3mm to ID of wheel) to eliminate vibrations.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Dodge Ram 3500 Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2006 Dodge Ram 3500 Regular Cab?
The 2006 Dodge Ram 3500 Regular Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is 43mm.
What other years of Dodge Ram 3500 Regular Cab have the same bolt pattern as the 2006?
The Dodge Ram 3500 Regular Cab uses the 8x165.1 pattern from 1994 through 2010. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Why is matching the 121.3mm center bore important for the 2006 Ram 3500 Regular Cab?
The 121.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 2006 Dodge?
The 2006 Ram 3500 Regular Cab uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2006 Dodge Ram 3500 Regular Cab?
The OEM offset for the 2006 Ram 3500 Regular Cab is typically around 43mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Dodge fit my 2006 Ram 3500 Regular Cab?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 121.3mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset