2000 Dodge Ram Wagon 1500 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Dodge Ram Wagon 1500, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 9/16" (18 UNF) |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 25 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2000 Ram Wagon 1500 — Year-Specific Fitment Context
The 2000 Dodge Ram Wagon 1500 is in year 6 of 8 using the 5x139.7 pattern (1995–2002). Wheels from any 1995–2002 Dodge Ram Wagon 1500 are cross-compatible with the 2000 model.
Dodge Ram Wagon 1500 Bolt Pattern by Year
The table below shows how the Ram Wagon 1500's wheel specifications have changed over the years. The 2000 model year is highlighted.
Fitment Notes
The 2000 Dodge Ram Wagon 1500 has a bolt pattern of 5x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5.5".
This means it is a 5 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Dodge Ram Wagon 1500 appears from 1995 to 2002 (8 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
2000 Dodge Ram Wagon 1500 — Frequently Asked Questions
What is the bolt pattern for a 2000 Dodge Ram Wagon 1500?
The 2000 Dodge Ram Wagon 1500 uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25mm.
What other years of Dodge Ram Wagon 1500 have the same bolt pattern as the 2000?
The Dodge Ram Wagon 1500 uses the 5x139.7 pattern from 1995 through 2002. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2000 Dodge Ram Wagon 1500?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 25mm, and a center bore of at least 77.8mm (using hub rings if larger).
What is the factory wheel offset for a 2000 Dodge Ram Wagon 1500?
The OEM offset for the 2000 Ram Wagon 1500 is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2000 Dodge Ram Wagon 1500?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Ram Wagon 1500, the PCD is 5x139.7.
What lug nut size does the 2000 Dodge Ram Wagon 1500 use?
The 2000 Dodge Ram Wagon 1500 uses N 9/16" (18 UNF) lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Dodge Ram Wagon 1500 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1995-2002 (8 model years).
- Observed bolt-pattern variants: 1 (5x139.7).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2000 Dodge Ram Wagon 1500, please report it via our About page contact so we can verify and update this record.