2007 Dodge Sprinter 2500 Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Dodge Sprinter 2500 Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 18 |
| Center Bore (CB) | 121.3 mm |
| Offset (ET) | 25 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2007 Sprinter 2500 Passenger — Year-Specific Fitment Context
The 2007 Dodge Sprinter 2500 Passenger is in year 5 of 6 using the 8x165.1 pattern (2003–2008). Wheels from any 2003–2008 Dodge Sprinter 2500 Passenger are cross-compatible with the 2007 model.
Dodge Sprinter 2500 Passenger Bolt Pattern by Year
The table below shows how the Sprinter 2500 Passenger's wheel specifications have changed over the years. The 2007 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2007 Dodge Sprinter 2500 Passenger
For your 2007 Dodge Sprinter 2500 Passenger, wheel selection must prioritize the 8x165.1 bolt pattern and 121.3mm center bore. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is carried by the hub, not the lug nuts. The factory offset is 25mm; deviations beyond ±5mm may cause rubbing or suspension interference. Always verify lug nut thread pitch (9/16-18) and seat type—use conical (60-degree) or ball seat lugs as specified. Never mix seat types; improper engagement can lead to wheel loss. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Dodge Sprinter 2500 Passenger appears from 2003 to 2008 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140-150 ft-lbs after 50 miles, then periodically check.
- ✅ Avoid wheels with offset below 20mm or above 30mm to prevent clearance issues.
- ✅ Ensure aftermarket wheels have a minimum load rating of 3,500 lbs per wheel for safety.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Dodge Sprinter 2500 Passenger — Frequently Asked Questions
What is the bolt pattern for a 2007 Dodge Sprinter 2500 Passenger?
The 2007 Dodge Sprinter 2500 Passenger uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is 25mm.
What other years of Dodge Sprinter 2500 Passenger have the same bolt pattern as the 2007?
The Dodge Sprinter 2500 Passenger uses the 8x165.1 pattern from 2003 through 2008. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What lug nut size does the 2007 Dodge Sprinter 2500 Passenger use?
The 2007 Dodge Sprinter 2500 Passenger uses 9/16 18 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2007 Dodge Sprinter 2500 Passenger?
The factory center bore (hub bore) for the 2007 Dodge Sprinter 2500 Passenger is 121.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2007 Dodge?
The 2007 Sprinter 2500 Passenger uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2007 Dodge Sprinter 2500 Passenger?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Sprinter 2500 Passenger, the PCD is 8x165.1.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset