2008 Dodge Sprinter 2500 Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Dodge Sprinter 2500 Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 18 |
| Center Bore (CB) | 121.3 mm |
| Offset (ET) | 25 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2008 Sprinter 2500 Passenger — Year-Specific Fitment Context
The 2008 model year is the final year of the Dodge Sprinter 2500 Passenger's 8x165.1 bolt pattern run (since 2003). Wheels from any 2003–2008 Dodge Sprinter 2500 Passenger are cross-compatible with the 2008 model.
Dodge Sprinter 2500 Passenger Bolt Pattern by Year
The table below shows how the Sprinter 2500 Passenger's wheel specifications have changed over the years. The 2008 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2008 Dodge Sprinter 2500 Passenger
When selecting wheels for your 2008 Dodge Sprinter 2500 Passenger, the 8x165.1 bolt pattern is shared with 2003-2008 models. The center bore is 121.3mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is critical: the factory spec is 25mm. Sticking close to this range (20-30mm) avoids rubbing on suspension or body components. Always use the correct lug nuts: 9/16-18 thread with a conical (60-degree) seat. Never use ball-seat or acorn nuts, as they can loosen or damage the wheel. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Dodge Sprinter 2500 Passenger appears from 2003 to 2008 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140-160 ft-lbs after 50-100 miles, then periodically check.
- ✅ Avoid wheels with offset below 20mm; they may rub the brake calipers or suspension.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 121.3mm exactly.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Dodge Sprinter 2500 Passenger — Frequently Asked Questions
What is the bolt pattern for a 2008 Dodge Sprinter 2500 Passenger?
The 2008 Dodge Sprinter 2500 Passenger uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is 25mm.
What other years of Dodge Sprinter 2500 Passenger have the same bolt pattern as the 2008?
The Dodge Sprinter 2500 Passenger uses the 8x165.1 pattern from 2003 through 2008. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What does 25mm offset mean for the 2008 Sprinter 2500 Passenger?
An offset of 25mm means the wheel's mounting surface is 25mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Dodge.
Do 2008 Dodge Sprinter 2500 Passengers use lug bolts or lug nuts?
The 2008 Sprinter 2500 Passenger requires 9/16 18 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2008 Dodge Sprinter 2500 Passenger?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 25mm, and a center bore of at least 121.3mm (using hub rings if larger).
What is the PCD for a 2008 Dodge Sprinter 2500 Passenger?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Sprinter 2500 Passenger, the PCD is 8x165.1.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset