2010 Ferrari 599 GTB Fiorano Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Ferrari 599 GTB Fiorano, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 42 front, 64 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 599 GTB Fiorano — Year-Specific Fitment Context
The 2010 Ferrari 599 GTB Fiorano is in year 4 of 5 using the 5x114.3 pattern (2007–2011). Wheels from any 2007–2011 Ferrari 599 GTB Fiorano are cross-compatible with the 2010 model.
Ferrari 599 GTB Fiorano Bolt Pattern by Year
The table below shows how the 599 GTB Fiorano's wheel specifications have changed over the years. The 2010 model year is highlighted.
Fitment Notes
The 2010 Ferrari 599 GTB Fiorano has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ferrari 599 GTB Fiorano appears from 2007 to 2011 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 22.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2010 Ferrari 599 GTB Fiorano — Frequently Asked Questions
What is the bolt pattern for a 2010 Ferrari 599 GTB Fiorano?
The 2010 Ferrari 599 GTB Fiorano uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 42 front, 64 rearmm.
What other years of Ferrari 599 GTB Fiorano have the same bolt pattern as the 2010?
The Ferrari 599 GTB Fiorano uses the 5x114.3 pattern from 2007 through 2011. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What does 42 front, 64 rearmm offset mean for the 2010 599 GTB Fiorano?
An offset of 42 front, 64 rearmm means the wheel's mounting surface is 42 front, 64 rearmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ferrari.
Do 2010 Ferrari 599 GTB Fioranos use lug bolts or lug nuts?
The 2010 599 GTB Fiorano requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2010 Ferrari 599 GTB Fiorano?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 599 GTB Fiorano, the PCD is 5x114.3.
What is the factory wheel offset for a 2010 Ferrari 599 GTB Fiorano?
The OEM offset for the 2010 599 GTB Fiorano is typically around 42 front, 64 rearmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ferrari 599 GTB Fiorano is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2007-2011 (5 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 22.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2010 Ferrari 599 GTB Fiorano, please report it via our About page contact so we can verify and update this record.