2007 Ferrari 599 GTB Fiorano Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Ferrari 599 GTB Fiorano, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 42 front, 64 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 599 GTB Fiorano — Year-Specific Fitment Context
The 2007 model year marks the beginning of the Ferrari 599 GTB Fiorano's 5x114.3 bolt pattern era, which continued through 2011 (5 consecutive years). Wheels from any 2007–2011 Ferrari 599 GTB Fiorano are cross-compatible with the 2007 model.
Ferrari 599 GTB Fiorano Bolt Pattern by Year
The table below shows how the 599 GTB Fiorano's wheel specifications have changed over the years. The 2007 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 Ferrari 599 GTB Fiorano
For the 2007 Ferrari 599 GTB Fiorano, the bolt pattern is 5x114.3mm, but the center bore is a critical 67.1mm. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is highly sensitive: front wheels must be 42mm offset, rear 64mm. Deviating by even 5mm can cause rubbing or clearance issues with the massive brakes and suspension. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Ferrari uses a ball seat, not conical. Using incorrect lug nuts can lead to wheel loosening. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Ferrari 599 GTB Fiorano appears from 2007 to 2011 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 22.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings with aftermarket wheels to match the 67.1mm center bore; otherwise, vibrations may occur.
- ✅ Stick strictly to the factory offset: 42mm front and 64mm rear. Even small changes can cause tire rubbing on the fenders or suspension.
- ✅ Use only ball-seat lug nuts with the correct 14x1.50 thread pitch. Conical or tapered seats will not properly secure the wheel.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Ferrari 599 GTB Fiorano — Frequently Asked Questions
What is the bolt pattern for a 2007 Ferrari 599 GTB Fiorano?
The 2007 Ferrari 599 GTB Fiorano uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 42 front, 64 rearmm.
What other years of Ferrari 599 GTB Fiorano have the same bolt pattern as the 2007?
The Ferrari 599 GTB Fiorano uses the 5x114.3 pattern from 2007 through 2011. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the factory wheel offset for a 2007 Ferrari 599 GTB Fiorano?
The OEM offset for the 2007 599 GTB Fiorano is typically around 42 front, 64 rearmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 67.1mm center bore important for the 2007 599 GTB Fiorano?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2007 Ferrari 599 GTB Fiorano?
The factory center bore (hub bore) for the 2007 Ferrari 599 GTB Fiorano is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Ferrari fit my 2007 599 GTB Fiorano?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset