2011 Ferrari 599 GTB Fiorano Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Ferrari 599 GTB Fiorano, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 42 front, 64 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 599 GTB Fiorano — Year-Specific Fitment Context
The 2011 model year is the final year of the Ferrari 599 GTB Fiorano's 5x114.3 bolt pattern run (since 2007). Wheels from any 2007–2011 Ferrari 599 GTB Fiorano are cross-compatible with the 2011 model.
Ferrari 599 GTB Fiorano Bolt Pattern by Year
The table below shows how the 599 GTB Fiorano's wheel specifications have changed over the years. The 2011 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Ferrari 599 GTB Fiorano
When selecting wheels for the 2011 Ferrari 599 GTB Fiorano, the 5x114.3 bolt pattern is shared with many aftermarket options, but the 67.1mm center bore is critical. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is highly sensitive: front wheels need 42mm offset, rear 64mm. Deviating more than 5mm can cause rubbing or clearance issues with the wide fenders and brake calipers. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—factory wheels use ball seats, while aftermarket typically require conical (60-degree) seats. Mixing seat types can lead to loose wheels or damaged studs. Verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Ferrari 599 GTB Fiorano appears from 2007 to 2011 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 22.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for thermal expansion and wheel seating.
- ✅ Aftermarket wheels often require hub-centric rings (67.1mm ID to 73.1mm OD) to avoid steering wheel vibration.
- ✅ Double-check brake caliper clearance, especially with concave spoke designs, as the 599's large brakes are tight.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Ferrari 599 GTB Fiorano — Frequently Asked Questions
What is the bolt pattern for a 2011 Ferrari 599 GTB Fiorano?
The 2011 Ferrari 599 GTB Fiorano uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 42 front, 64 rearmm.
What other years of Ferrari 599 GTB Fiorano have the same bolt pattern as the 2011?
The Ferrari 599 GTB Fiorano uses the 5x114.3 pattern from 2007 through 2011. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Will wheels from another Ferrari fit my 2011 599 GTB Fiorano?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
How tight should I torque the lug nuts on a 2011 Ferrari 599 GTB Fiorano?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2011 Ferrari 599 GTB Fiorano?
The factory center bore (hub bore) for the 2011 Ferrari 599 GTB Fiorano is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2011 Ferrari 599 GTB Fiorano?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset