2014 Ferrari FF Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Ferrari FF, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 front, 52 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
2014 FF — Year-Specific Fitment Context
The 2014 Ferrari FF is in year 3 of 5 using the 5x114.3 pattern (2012–2016). Wheels from any 2012–2016 Ferrari FF are cross-compatible with the 2014 model.
Ferrari FF Bolt Pattern by Year
The table below shows how the FF's wheel specifications have changed over the years. The 2014 model year is highlighted.
Fitment Notes
The 2014 Ferrari FF has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ferrari FF appears from 2012 to 2016 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 7.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2014 Ferrari FF — Frequently Asked Questions
What is the bolt pattern for a 2014 Ferrari FF?
The 2014 Ferrari FF uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45 front, 52 rearmm.
What other years of Ferrari FF have the same bolt pattern as the 2014?
The Ferrari FF uses the 5x114.3 pattern from 2012 through 2016. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the factory wheel offset for a 2014 Ferrari FF?
The OEM offset for the 2014 FF is typically around 45 front, 52 rearmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2014 Ferrari FF?
The factory center bore (hub bore) for the 2014 Ferrari FF is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2014 Ferrari FF use?
The 2014 Ferrari FF uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Ferrari fit my 2014 FF?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ferrari FF is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2012-2016 (5 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 7.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2014 Ferrari FF, please report it via our About page contact so we can verify and update this record.