2013 Ford E150 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Ford E150 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
2013 E150 Cargo — Year-Specific Fitment Context
The 2013 Ford E150 Cargo is in year 6 of 7 using the 8x165.1 pattern (2008–2014). Wheels from any 2008–2014 Ford E150 Cargo are cross-compatible with the 2013 model.
Ford E150 Cargo Bolt Pattern by Year
The table below shows how the E150 Cargo's wheel specifications have changed over the years. The 2013 model year is highlighted.
Fitment Notes
The 2013 Ford E150 Cargo has a bolt pattern of 8x165.1.
Imperial Conversion: This bolt pattern is commonly referred to as 8x6.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 8x6.5".
This means it is a 8 lug pattern with a circle diameter of 165.1mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford E150 Cargo appears from 2008 to 2014 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
2013 Ford E150 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2013 Ford E150 Cargo?
The 2013 Ford E150 Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford E150 Cargo have the same bolt pattern as the 2013?
The Ford E150 Cargo uses the 8x165.1 pattern from 2008 through 2014. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What is the PCD for a 2013 Ford E150 Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 E150 Cargo, the PCD is 8x165.1.
How tight should I torque the lug nuts on a 2013 Ford E150 Cargo?
Refer to your owner's manual for exact specs, but always tighten the 9/16 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2013 Ford E150 Cargo?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 0-15mmmm, and a center bore of at least 124.9mm (using hub rings if larger).
What does 0-15mmmm offset mean for the 2013 E150 Cargo?
An offset of 0-15mmmm means the wheel's mounting surface is 0-15mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford E150 Cargo is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2008-2014 (7 model years).
- Observed bolt-pattern variants: 1 (8x165.1).
- Observed total offset span across years: 15.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2013 Ford E150 Cargo, please report it via our About page contact so we can verify and update this record.