2014 Ford E150 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Ford E150 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2014 E150 Cargo — Year-Specific Fitment Context
The 2014 model year is the final year of the Ford E150 Cargo's 8x165.1 bolt pattern run (since 2008). Wheels from any 2008–2014 Ford E150 Cargo are cross-compatible with the 2014 model.
Ford E150 Cargo Bolt Pattern by Year
The table below shows how the E150 Cargo's wheel specifications have changed over the years. The 2014 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2014 Ford E150 Cargo
For the 2014 Ford E150 Cargo, the 8x165.1 bolt pattern and 124.9mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 130mm), requiring hub-centric rings to prevent vibration and ensure load support. The offset range is tight (0-15mm); exceeding this can cause rubbing or bearing stress. Always use the correct 9/16" lug nuts with a conical (60-degree) seat—never ball seat—to avoid loosening. Re-torque after 50 miles. Verify wheel load rating meets or exceeds the van's GVWR.
Historical Fitment Data Reference
In our dataset, Ford E150 Cargo appears from 2008 to 2014 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140-150 ft-lbs after 50 miles of driving.
- ✅ Avoid wheels with offset beyond 0-15mm; even 20mm can cause clearance issues with brake calipers.
- ✅ Use hub-centric rings (plastic or aluminum) for any aftermarket wheel with a bore larger than 124.9mm.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Ford E150 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2014 Ford E150 Cargo?
The 2014 Ford E150 Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford E150 Cargo have the same bolt pattern as the 2014?
The Ford E150 Cargo uses the 8x165.1 pattern from 2008 through 2014. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the PCD for a 2014 Ford E150 Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 E150 Cargo, the PCD is 8x165.1.
Can I put aftermarket wheels on my 2014 Ford E150 Cargo?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 0-15mmmm, and a center bore of at least 124.9mm (using hub rings if larger).
Do 2014 Ford E150 Cargos use lug bolts or lug nuts?
The 2014 E150 Cargo requires 9/16 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2014 Ford E150 Cargo?
Yes, but ensure the wheel spacers match the 8x165.1 bolt pattern and 124.9mm center bore. Also verify that you have enough thread engagement for your 9/16 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset