2007 Ford Edge Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Ford Edge, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" (20 UNF) |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 44 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 Edge — Year-Specific Fitment Context
The 2007 model year marks the beginning of the Ford Edge's 5x114.3 bolt pattern era, which continued through 2015 (9 consecutive years). Wheels from any 2007–2015 Ford Edge are cross-compatible with the 2007 model. Across its full production run (2007–2024), the Edge has also used: 5x108.
Ford Edge Bolt Pattern by Year
The table below shows how the Edge's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2007 | 5x114.3 | 70.5 | 44 |
| 2008 | 5x114.3 | 70.5 | 44 |
| 2009 | 5x114.3 | 70.5 | 44 |
| 2010 | 5x114.3 | 70.5 | 44 |
| 2011 | 5x114.3 | 70.5 | 44 |
| 2012 | 5x114.3 | 70.5 | 44 |
| 2013 | 5x114.3 | 70.5 | 44 |
| 2014 | 5x114.3 | 70.5 | 44 |
| 2015 | 5x114.3 | 70.5 | 44 |
| 2016 | 5x108 | 63.4 | 52 |
| 2017 | 5x108 | 63.4 | 52 |
| 2018 | 5x108 | 63.4 | 52 |
| 2019 | 5x108 | 63.4 | 50 |
| 2020 | 5x108 | 63.4 | 50 |
| 2021 | 5x108 | 63.4 | 50 |
| 2022 | 5x108 | 63.4 | 50 |
| 2023 | 5x108 | 63.4 | 50 |
| 2024 | 5x108 | 63.4 | 50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 Ford Edge
For the 2007 Ford Edge, the bolt pattern is 5x114.3, but the center bore is 70.5mm—larger than many aftermarket wheels. Always use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 44mm; deviations beyond ±5mm may cause rubbing or clearance issues. Lug nuts are 1/2"-20 UNF with a conical (60-degree) seat. Never use ball-seat or shank-style nuts, as they can loosen or damage the wheel. Verify that aftermarket wheels are hub-centric or use compatible rings, and check for brake caliper clearance. Proper fitment is critical for safety.
Historical Fitment Data Reference
In our dataset, Ford Edge appears from 2007 to 2024 (18 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ When lowering the vehicle, offset must be adjusted to prevent tire-to-fender contact.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Ford Edge — Frequently Asked Questions
What is the bolt pattern for a 2007 Ford Edge?
The 2007 Ford Edge uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 44mm.
What other years of Ford Edge have the same bolt pattern as the 2007?
The Ford Edge uses the 5x114.3 pattern from 2007 through 2015. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2007 Ford Edge?
Refer to your owner's manual for exact specs, but always tighten the N 1/2" (20 UNF) hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2007 Ford Edge?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 70.5mm center bore. Also verify that you have enough thread engagement for your N 1/2" (20 UNF) hardware.
Will wheels from another Ford fit my 2007 Edge?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.5mm.
Why is matching the 70.5mm center bore important for the 2007 Edge?
The 70.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset