2009 Ford Edge Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Ford Edge, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" (20 UNF) |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 44 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2009 Edge — Year-Specific Fitment Context
The 2009 Ford Edge is in year 3 of 9 using the 5x114.3 pattern (2007–2015). Wheels from any 2007–2015 Ford Edge are cross-compatible with the 2009 model. Across its full production run (2007–2024), the Edge has also used: 5x108.
Ford Edge Bolt Pattern by Year
The table below shows how the Edge's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 5x114.3 | 70.5 | 44 |
| 2008 | 5x114.3 | 70.5 | 44 |
| ▸ 2009 | 5x114.3 | 70.5 | 44 |
| 2010 | 5x114.3 | 70.5 | 44 |
| 2011 | 5x114.3 | 70.5 | 44 |
| 2012 | 5x114.3 | 70.5 | 44 |
| 2013 | 5x114.3 | 70.5 | 44 |
| 2014 | 5x114.3 | 70.5 | 44 |
| 2015 | 5x114.3 | 70.5 | 44 |
| 2016 | 5x108 | 63.4 | 52 |
| 2017 | 5x108 | 63.4 | 52 |
| 2018 | 5x108 | 63.4 | 52 |
| 2019 | 5x108 | 63.4 | 50 |
| 2020 | 5x108 | 63.4 | 50 |
| 2021 | 5x108 | 63.4 | 50 |
| 2022 | 5x108 | 63.4 | 50 |
| 2023 | 5x108 | 63.4 | 50 |
| 2024 | 5x108 | 63.4 | 50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2009 Ford Edge
The 2009 Ford Edge uses a 5x114.3 bolt pattern with a 70.5mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 44mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (1/2"-20 UNF) and seat type (cone seat). Mismatched lug nuts can cause wheel loosening or damage. Verify that aftermarket wheels are hub-centric and rated for the Edge's weight.
Historical Fitment Data Reference
In our dataset, Ford Edge appears from 2007 to 2024 (18 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 70.5mm bore is critical for proper centering.
- ✅ Check offset carefully: lower offset (e.g., 35mm) may cause inner tire rubbing on suspension components.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Ford Edge — Frequently Asked Questions
What is the bolt pattern for a 2009 Ford Edge?
The 2009 Ford Edge uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 44mm.
What other years of Ford Edge have the same bolt pattern as the 2009?
The Ford Edge uses the 5x114.3 pattern from 2007 through 2015. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What lug nut size does the 2009 Ford Edge use?
The 2009 Ford Edge uses N 1/2" (20 UNF) lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2009 Ford Edge?
The OEM offset for the 2009 Edge is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Ford fit my 2009 Edge?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.5mm.
What does 44mm offset mean for the 2009 Edge?
An offset of 44mm means the wheel's mounting surface is 44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset