2000 Ford Expedition Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Ford Expedition, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x135 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.75 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 10 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2000 Expedition — Year-Specific Fitment Context
The 2000 Ford Expedition is in year 4 of 7 using the 5x135 pattern (1997–2003). Wheels from any 1997–2003 Ford Expedition are cross-compatible with the 2000 model. Across its full production run (1997–2024), the Expedition has also used: 6x135.
Ford Expedition Bolt Pattern by Year
The table below shows how the Expedition's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x135 | 87.1 | 10 |
| 1998 | 5x135 | 87.1 | 10 |
| 1999 | 5x135 | 87.1 | 10 |
| ▸ 2000 | 5x135 | 87.1 | 10 |
| 2001 | 5x135 | 87.1 | 10 |
| 2002 | 5x135 | 87.1 | 10 |
| 2003 | 5x135 | 87.1 | 10 |
| 2004 | 6x135 | 87.1 | 44 |
| 2005 | 6x135 | 87.1 | 44 |
| 2006 | 6x135 | 87.1 | 44 |
| 2007 | 6x135 | 87.1 | 44 |
| 2008 | 6x135 | 87.1 | 35 |
| 2009 | 6x135 | 87.1 | 35 |
| 2010 | 6x135 | 87.1 | 35 |
| 2011 | 6x135 | 87.1 | 35 |
| 2012 | 6x135 | 87.1 | 35 |
| 2013 | 6x135 | 87.1 | 35 |
| 2014 | 6x135 | 87.1 | 35 |
| 2015 | 6x135 | 87.1 | 35 |
| 2016 | 6x135 | 87.1 | 35 |
| 2017 | 6x135 | 87.1 | 35 |
| 2018 | 6x135 | 87.1 | 35 |
| 2019 | 6x135 | 87.1 | 44 |
| 2020 | 6x135 | 87.1 | 44 |
| 2021 | 6x135 | 87.1 | 44 |
| 2022 | 6x135 | 87.1 | 44 |
| 2023 | 6x135 | 87.1 | 44 |
| 2024 | 6x135 | 87.1 | 44 |
5x135 Pattern Context
This bolt pattern appears on 31 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x135:
Expert Buying Guide for 2000 Ford Expedition
The 2000 Ford Expedition uses a 5x135 bolt pattern with an 87.1mm center bore and a 10mm offset. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; staying within ±5mm of the factory 10mm offset is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.75) and seat type (cone seat). Never use ball-seat lug nuts on cone-seat wheels, as this can cause wheel loosening. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford Expedition appears from 1997 to 2024 (28 model years). Across model years, this model appears with 2 bolt patterns (5x135, 6x135).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 34.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 150 ft-lbs after 50-100 miles of driving.
- ✅ Verify wheel center bore is 87.1mm or use hub-centric rings to avoid vibrations.
- ✅ Avoid using wheels from 2004+ Expeditions (6x135 pattern) without proper adapters.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Ford Expedition — Frequently Asked Questions
What is the bolt pattern for a 2000 Ford Expedition?
The 2000 Ford Expedition uses a 5x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 10mm.
What other years of Ford Expedition have the same bolt pattern as the 2000?
The Ford Expedition uses the 5x135 pattern from 1997 through 2003. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Why is matching the 87.1mm center bore important for the 2000 Expedition?
The 87.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2000 Ford Expedition?
The factory center bore (hub bore) for the 2000 Ford Expedition is 87.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2000 Ford Expedition?
The OEM offset for the 2000 Expedition is typically around 10mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2000 Ford Expeditions use lug bolts or lug nuts?
The 2000 Expedition requires N 12x1.75 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset