2006 Ford Expedition Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Ford Expedition, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x135 |
|---|---|
| Lug Nut / Bolt Size | N 14x2.00 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 150 ft-lbs (204 Nm) |
2006 Expedition — Year-Specific Fitment Context
The 2006 Ford Expedition is in year 3 of 21 using the 6x135 pattern (2004–2024). Wheels from any 2004–2024 Ford Expedition are cross-compatible with the 2006 model. Across its full production run (1997–2024), the Expedition has also used: 5x135.
Ford Expedition Bolt Pattern by Year
The table below shows how the Expedition's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x135 | 87.1 | 10 |
| 1998 | 5x135 | 87.1 | 10 |
| 1999 | 5x135 | 87.1 | 10 |
| 2000 | 5x135 | 87.1 | 10 |
| 2001 | 5x135 | 87.1 | 10 |
| 2002 | 5x135 | 87.1 | 10 |
| 2003 | 5x135 | 87.1 | 10 |
| 2004 | 6x135 | 87.1 | 44 |
| 2005 | 6x135 | 87.1 | 44 |
| ▸ 2006 | 6x135 | 87.1 | 44 |
| 2007 | 6x135 | 87.1 | 44 |
| 2008 | 6x135 | 87.1 | 35 |
| 2009 | 6x135 | 87.1 | 35 |
| 2010 | 6x135 | 87.1 | 35 |
| 2011 | 6x135 | 87.1 | 35 |
| 2012 | 6x135 | 87.1 | 35 |
| 2013 | 6x135 | 87.1 | 35 |
| 2014 | 6x135 | 87.1 | 35 |
| 2015 | 6x135 | 87.1 | 35 |
| 2016 | 6x135 | 87.1 | 35 |
| 2017 | 6x135 | 87.1 | 35 |
| 2018 | 6x135 | 87.1 | 35 |
| 2019 | 6x135 | 87.1 | 44 |
| 2020 | 6x135 | 87.1 | 44 |
| 2021 | 6x135 | 87.1 | 44 |
| 2022 | 6x135 | 87.1 | 44 |
| 2023 | 6x135 | 87.1 | 44 |
| 2024 | 6x135 | 87.1 | 44 |
6x135 Pattern Context
This bolt pattern appears on 147 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x135:
Expert Buying Guide for 2006 Ford Expedition
For your 2006 Ford Expedition, the 6x135 bolt pattern and 87.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The stock offset is 44mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x2.00) and seat type—factory wheels use a cone seat, while aftermarket wheels may require ball or flat seats. Mismatched lug nuts can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully to avoid suspension or brake interference.
Historical Fitment Data Reference
In our dataset, Ford Expedition appears from 1997 to 2024 (28 model years). Across model years, this model appears with 2 bolt patterns (5x135, 6x135).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 34.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ When using hub-centric rings, ensure they are made of aluminum or plastic and fit snugly to prevent corrosion.
- ✅ Avoid wheels with offset below 39mm or above 49mm to prevent rubbing on fenders or suspension components.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Ford Expedition — Frequently Asked Questions
What is the bolt pattern for a 2006 Ford Expedition?
The 2006 Ford Expedition uses a 6x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 44mm.
What other years of Ford Expedition have the same bolt pattern as the 2006?
The Ford Expedition uses the 6x135 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What is the PCD for a 2006 Ford Expedition?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2006 Expedition, the PCD is 6x135.
Why is matching the 87.1mm center bore important for the 2006 Expedition?
The 87.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2006 Ford Expeditions use lug bolts or lug nuts?
The 2006 Expedition requires N 14x2.00 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2006 Ford Expedition?
The OEM offset for the 2006 Expedition is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset