2020 Ford Expedition Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Ford Expedition, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x135 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Expedition — Year-Specific Fitment Context
The 2020 Ford Expedition is in year 17 of 21 using the 6x135 pattern (2004–2024). Wheels from any 2004–2024 Ford Expedition are cross-compatible with the 2020 model. Across its full production run (1997–2024), the Expedition has also used: 5x135.
Ford Expedition Bolt Pattern by Year
The table below shows how the Expedition's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x135 | 87.1 | 10 |
| 1998 | 5x135 | 87.1 | 10 |
| 1999 | 5x135 | 87.1 | 10 |
| 2000 | 5x135 | 87.1 | 10 |
| 2001 | 5x135 | 87.1 | 10 |
| 2002 | 5x135 | 87.1 | 10 |
| 2003 | 5x135 | 87.1 | 10 |
| 2004 | 6x135 | 87.1 | 44 |
| 2005 | 6x135 | 87.1 | 44 |
| 2006 | 6x135 | 87.1 | 44 |
| 2007 | 6x135 | 87.1 | 44 |
| 2008 | 6x135 | 87.1 | 35 |
| 2009 | 6x135 | 87.1 | 35 |
| 2010 | 6x135 | 87.1 | 35 |
| 2011 | 6x135 | 87.1 | 35 |
| 2012 | 6x135 | 87.1 | 35 |
| 2013 | 6x135 | 87.1 | 35 |
| 2014 | 6x135 | 87.1 | 35 |
| 2015 | 6x135 | 87.1 | 35 |
| 2016 | 6x135 | 87.1 | 35 |
| 2017 | 6x135 | 87.1 | 35 |
| 2018 | 6x135 | 87.1 | 35 |
| 2019 | 6x135 | 87.1 | 44 |
| ▸ 2020 | 6x135 | 87.1 | 44 |
| 2021 | 6x135 | 87.1 | 44 |
| 2022 | 6x135 | 87.1 | 44 |
| 2023 | 6x135 | 87.1 | 44 |
| 2024 | 6x135 | 87.1 | 44 |
6x135 Pattern Context
This bolt pattern appears on 147 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x135:
Expert Buying Guide for 2020 Ford Expedition
For the 2020 Ford Expedition, the 6x135 bolt pattern and 87.1mm center bore are critical. Aftermarket wheels must have a bore ≥87.1mm; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. The factory offset is 44mm; staying within ±5mm maintains proper scrub radius and prevents rubbing. Always use lug nuts with the correct 14x1.5 thread pitch and a 60-degree conical seat—never use ball-seat or shank-style nuts. Mismatched lug nuts can loosen or damage the wheel. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford Expedition appears from 1997 to 2024 (28 model years). Across model years, this model appears with 2 bolt patterns (5x135, 6x135).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 34.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 150 ft-lbs after 50-100 miles, as wheel settling can cause loosening.
- ✅ Avoid wheels with a center bore smaller than 87.1mm; they will not fit without machining.
- ✅ Check offset carefully: too low (e.g., 0mm) can cause rubbing on suspension; too high (e.g., 50mm) may contact brake calipers.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Ford Expedition — Frequently Asked Questions
What is the bolt pattern for a 2020 Ford Expedition?
The 2020 Ford Expedition uses a 6x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 44mm.
What other years of Ford Expedition have the same bolt pattern as the 2020?
The Ford Expedition uses the 6x135 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What is the factory wheel offset for a 2020 Ford Expedition?
The OEM offset for the 2020 Expedition is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 87.1mm center bore important for the 2020 Expedition?
The 87.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2020 Ford Expedition?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Expedition, the PCD is 6x135.
Do 2020 Ford Expeditions use lug bolts or lug nuts?
The 2020 Expedition requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset