2011 Ford Expedition Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Ford Expedition, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x135 |
|---|---|
| Lug Nut / Bolt Size | N 14x2.00 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 150 ft-lbs (204 Nm) |
2011 Expedition — Year-Specific Fitment Context
The 2011 Ford Expedition is in year 8 of 21 using the 6x135 pattern (2004–2024). Wheels from any 2004–2024 Ford Expedition are cross-compatible with the 2011 model. Across its full production run (1997–2024), the Expedition has also used: 5x135.
Ford Expedition Bolt Pattern by Year
The table below shows how the Expedition's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x135 | 87.1 | 10 |
| 1998 | 5x135 | 87.1 | 10 |
| 1999 | 5x135 | 87.1 | 10 |
| 2000 | 5x135 | 87.1 | 10 |
| 2001 | 5x135 | 87.1 | 10 |
| 2002 | 5x135 | 87.1 | 10 |
| 2003 | 5x135 | 87.1 | 10 |
| 2004 | 6x135 | 87.1 | 44 |
| 2005 | 6x135 | 87.1 | 44 |
| 2006 | 6x135 | 87.1 | 44 |
| 2007 | 6x135 | 87.1 | 44 |
| 2008 | 6x135 | 87.1 | 35 |
| 2009 | 6x135 | 87.1 | 35 |
| 2010 | 6x135 | 87.1 | 35 |
| ▸ 2011 | 6x135 | 87.1 | 35 |
| 2012 | 6x135 | 87.1 | 35 |
| 2013 | 6x135 | 87.1 | 35 |
| 2014 | 6x135 | 87.1 | 35 |
| 2015 | 6x135 | 87.1 | 35 |
| 2016 | 6x135 | 87.1 | 35 |
| 2017 | 6x135 | 87.1 | 35 |
| 2018 | 6x135 | 87.1 | 35 |
| 2019 | 6x135 | 87.1 | 44 |
| 2020 | 6x135 | 87.1 | 44 |
| 2021 | 6x135 | 87.1 | 44 |
| 2022 | 6x135 | 87.1 | 44 |
| 2023 | 6x135 | 87.1 | 44 |
| 2024 | 6x135 | 87.1 | 44 |
6x135 Pattern Context
This bolt pattern appears on 147 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x135:
Expert Buying Guide for 2011 Ford Expedition
For the 2011 Ford Expedition, the 6x135 bolt pattern and 87.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 35mm; deviations affect handling and suspension clearance. Always verify lug nut compatibility: 14x2.00 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts can cause wheel loosening or damage. Stick to wheels from 2004–2024 Expeditions for direct fitment.
Historical Fitment Data Reference
In our dataset, Ford Expedition appears from 1997 to 2024 (28 model years). Across model years, this model appears with 2 bolt patterns (5x135, 6x135).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 34.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 150 ft-lbs after 50 miles of driving.
- ✅ Avoid wheels with offset below 25mm or above 45mm to prevent rubbing or bearing stress.
- ✅ Check for TPMS sensor compatibility; 2011 uses band-style sensors that may not fit aftermarket wheels.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Ford Expedition — Frequently Asked Questions
What is the bolt pattern for a 2011 Ford Expedition?
The 2011 Ford Expedition uses a 6x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 35mm.
What other years of Ford Expedition have the same bolt pattern as the 2011?
The Ford Expedition uses the 6x135 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I use spacers on my 2011 Ford Expedition?
Yes, but ensure the wheel spacers match the 6x135 bolt pattern and 87.1mm center bore. Also verify that you have enough thread engagement for your N 14x2.00 hardware.
How tight should I torque the lug nuts on a 2011 Ford Expedition?
Refer to your owner's manual for exact specs, but always tighten the N 14x2.00 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2011 Ford Expedition?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Expedition, the PCD is 6x135.
Will wheels from another Ford fit my 2011 Expedition?
Only if they share the exact same 6x135 bolt pattern, a compatible offset, and a center bore equal to or larger than 87.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset