2012 Ford Expedition Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Ford Expedition, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x135 |
|---|---|
| Lug Nut / Bolt Size | N 14x2.00 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 150 ft-lbs (204 Nm) |
2012 Expedition — Year-Specific Fitment Context
The 2012 Ford Expedition is in year 9 of 21 using the 6x135 pattern (2004–2024). Wheels from any 2004–2024 Ford Expedition are cross-compatible with the 2012 model. Across its full production run (1997–2024), the Expedition has also used: 5x135.
Ford Expedition Bolt Pattern by Year
The table below shows how the Expedition's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x135 | 87.1 | 10 |
| 1998 | 5x135 | 87.1 | 10 |
| 1999 | 5x135 | 87.1 | 10 |
| 2000 | 5x135 | 87.1 | 10 |
| 2001 | 5x135 | 87.1 | 10 |
| 2002 | 5x135 | 87.1 | 10 |
| 2003 | 5x135 | 87.1 | 10 |
| 2004 | 6x135 | 87.1 | 44 |
| 2005 | 6x135 | 87.1 | 44 |
| 2006 | 6x135 | 87.1 | 44 |
| 2007 | 6x135 | 87.1 | 44 |
| 2008 | 6x135 | 87.1 | 35 |
| 2009 | 6x135 | 87.1 | 35 |
| 2010 | 6x135 | 87.1 | 35 |
| 2011 | 6x135 | 87.1 | 35 |
| ▸ 2012 | 6x135 | 87.1 | 35 |
| 2013 | 6x135 | 87.1 | 35 |
| 2014 | 6x135 | 87.1 | 35 |
| 2015 | 6x135 | 87.1 | 35 |
| 2016 | 6x135 | 87.1 | 35 |
| 2017 | 6x135 | 87.1 | 35 |
| 2018 | 6x135 | 87.1 | 35 |
| 2019 | 6x135 | 87.1 | 44 |
| 2020 | 6x135 | 87.1 | 44 |
| 2021 | 6x135 | 87.1 | 44 |
| 2022 | 6x135 | 87.1 | 44 |
| 2023 | 6x135 | 87.1 | 44 |
| 2024 | 6x135 | 87.1 | 44 |
6x135 Pattern Context
This bolt pattern appears on 147 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x135:
Expert Buying Guide for 2012 Ford Expedition
For your 2012 Ford Expedition, the 6x135 bolt pattern and 87.1mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The recommended offset is around 35mm; deviations may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x2.00) and seat type (cone seat) to avoid loosening. Verify wheel load rating meets or exceeds OEM specs. Cross-compatible wheels from 2004–2024 Expeditions fit directly.
Historical Fitment Data Reference
In our dataset, Ford Expedition appears from 1997 to 2024 (28 model years). Across model years, this model appears with 2 bolt patterns (5x135, 6x135).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 34.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid wheels with offset below 25mm or above 45mm to prevent rubbing on suspension or fenders.
- ✅ Use a torque wrench set to 150 ft-lbs (OEM spec) and tighten in a star pattern.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Ford Expedition — Frequently Asked Questions
What is the bolt pattern for a 2012 Ford Expedition?
The 2012 Ford Expedition uses a 6x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 35mm.
What other years of Ford Expedition have the same bolt pattern as the 2012?
The Ford Expedition uses the 6x135 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What is the factory wheel offset for a 2012 Ford Expedition?
The OEM offset for the 2012 Expedition is typically around 35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 87.1mm center bore important for the 2012 Expedition?
The 87.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2012 Ford Expedition use?
The 2012 Ford Expedition uses N 14x2.00 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2012 Ford Expedition?
Refer to your owner's manual for exact specs, but always tighten the N 14x2.00 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset