2010 Ford Explorer Sport Trac Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Ford Explorer Sport Trac, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 44 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 Explorer Sport Trac — Year-Specific Fitment Context
The 2010 model year is the final year of the Ford Explorer Sport Trac's 5x114.3 bolt pattern run (since 2001). Wheels from any 2001–2010 Ford Explorer Sport Trac are cross-compatible with the 2010 model.
Ford Explorer Sport Trac Bolt Pattern by Year
The table below shows how the Explorer Sport Trac's wheel specifications have changed over the years. The 2010 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 Ford Explorer Sport Trac
For your 2010 Ford Explorer Sport Trac, the bolt pattern is 5x114.3 with a center bore of 70.5mm. When selecting aftermarket wheels, ensure they have a center bore of at least 70.5mm; if larger, use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is critical: stock offset is 44mm. Deviating more than ±5mm may cause rubbing or clearance issues with suspension and fenders. Always use lug nuts with the correct thread pitch (1/2-20) and seat type (conical/60-degree) to match the wheel. Improper seating can lead to wheel loosening. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Ford Explorer Sport Trac appears from 2001 to 2010 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 69.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 2011+ Explorer models as they have a different bolt pattern (5x4.5).
- ✅ Check for TPMS compatibility; aftermarket wheels may require new sensors or bands.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Ford Explorer Sport Trac — Frequently Asked Questions
What is the bolt pattern for a 2010 Ford Explorer Sport Trac?
The 2010 Ford Explorer Sport Trac uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 44mm.
What other years of Ford Explorer Sport Trac have the same bolt pattern as the 2010?
The Ford Explorer Sport Trac uses the 5x114.3 pattern from 2001 through 2010. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2010 Ford Explorer Sport Trac?
Refer to your owner's manual for exact specs, but always tighten the 1/2 20 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2010 Ford Explorer Sport Trac?
The factory center bore (hub bore) for the 2010 Ford Explorer Sport Trac is 70.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2010 Ford Explorer Sport Tracs use lug bolts or lug nuts?
The 2010 Explorer Sport Trac requires 1/2 20 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2010 Ford Explorer Sport Trac?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Explorer Sport Trac, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset