2002 Ford Explorer Sport Trac Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Ford Explorer Sport Trac, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 44 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2002 Explorer Sport Trac — Year-Specific Fitment Context
The 2002 Ford Explorer Sport Trac is in year 2 of 10 using the 5x114.3 pattern (2001–2010). Wheels from any 2001–2010 Ford Explorer Sport Trac are cross-compatible with the 2002 model.
Ford Explorer Sport Trac Bolt Pattern by Year
The table below shows how the Explorer Sport Trac's wheel specifications have changed over the years. The 2002 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2002 Ford Explorer Sport Trac
For the 2002 Ford Explorer Sport Trac, the bolt pattern is 5x114.3mm with a center bore of 70.5mm. When selecting aftermarket wheels, ensure they have a center bore of at least 70.5mm or use hub-centric rings to prevent vibrations. The factory offset is 44mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (1/2-20) and seat type (conical/60-degree). Never use ball-seat lug nuts on conical-seat wheels, as this can lead to wheel detachment. Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
Historical Fitment Data Reference
In our dataset, Ford Explorer Sport Trac appears from 2001 to 2010 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 69.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore smaller than 70.5mm; use hub-centric rings if needed.
- ✅ Check offset carefully: 44mm is standard; offsets from 38mm to 50mm may fit, but test for clearance.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Ford Explorer Sport Trac — Frequently Asked Questions
What is the bolt pattern for a 2002 Ford Explorer Sport Trac?
The 2002 Ford Explorer Sport Trac uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 44mm.
What other years of Ford Explorer Sport Trac have the same bolt pattern as the 2002?
The Ford Explorer Sport Trac uses the 5x114.3 pattern from 2001 through 2010. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What lug nut size does the 2002 Ford Explorer Sport Trac use?
The 2002 Ford Explorer Sport Trac uses 1/2 20 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 44mm offset mean for the 2002 Explorer Sport Trac?
An offset of 44mm means the wheel's mounting surface is 44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Can I put aftermarket wheels on my 2002 Ford Explorer Sport Trac?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 44mm, and a center bore of at least 70.5mm (using hub rings if larger).
What is the factory wheel offset for a 2002 Ford Explorer Sport Trac?
The OEM offset for the 2002 Explorer Sport Trac is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset