2026 Ford Motorhome Chassis Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Ford Motorhome Chassis is 8x170. It has a center bore of 125.2 mm, an offset range of Not Applicable, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 150 ft-lbs (203 Nm).
2026 Ford Motorhome Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Center Bore (Hub Bore) | 125.2 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 150 ft-lbs (203 Nm) |
2026 Motorhome Chassis — Year-Specific Fitment Context
The 2026 model year is the final year of the Ford Motorhome Chassis's 8x170 bolt pattern run (since 2024). Wheels from any 2024–2026 Ford Motorhome Chassis are cross-compatible with the 2026 model.
Ford Motorhome Chassis Bolt Pattern by Year
Looking for all generations? View the complete Ford Motorhome Chassis (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Motorhome Chassis's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Ford Motorhome Chassis Wheel Interchange & Donor Fitment Guide (8x170)
The 8x170 bolt pattern is shared by 197 vehicles in our database (uncommon). For safe wheel swaps on the 2026 Ford Motorhome Chassis, donor rims must match the 8x170 PCD and have a center bore of at least 125.2 mm:
DIRECT HUB MATCH Same 8x170 Pattern & Exact 125.2mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Ford F350 Super Duty Crew Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 2025 Ford E-450 | 125.2 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
| 2025 Ford F-250 | 125.2 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2025 Ford F-350 | 125.2 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2025 Ford F-450 | 125.2 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2025 Ford F-550 | 125.2 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
HUB RING FITMENT Same 8x170 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2021 Ford F250 Super Duty Regular Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
| 2014 Ford F250 Super Duty Super Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
| 2017 Ford F350 Super Duty Regular Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
| 2001 Ford F350 Super Duty Super Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
| 2015 Ford F250 Super Duty Crew Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (203 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Ford Motorhome Chassis — Frequently Asked Questions
What is the bolt pattern for a 2026 Ford Motorhome Chassis?
The 2026 Ford Motorhome Chassis uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 125.2mm and the offset is Not Applicablemm.
What other years of Ford Motorhome Chassis have the same bolt pattern as the 2026?
The Ford Motorhome Chassis uses the 8x170 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Do 2026 Ford Motorhome Chassiss use lug bolts or lug nuts?
The 2026 Motorhome Chassis requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does Not Applicablemm offset mean for the 2026 Motorhome Chassis?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
How tight should I torque the lug nuts on a 2026 Ford Motorhome Chassis?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2026 Ford Motorhome Chassis?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 Motorhome Chassis, the PCD is 8x170.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →