1998 Ford Windstar Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Ford Windstar Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1998 Windstar Cargo — Year-Specific Fitment Context
The 1998 Ford Windstar Cargo is in year 4 of 9 using the 5x108 pattern (1995–2003). Wheels from any 1995–2003 Ford Windstar Cargo are cross-compatible with the 1998 model.
Ford Windstar Cargo Bolt Pattern by Year
The table below shows how the Windstar Cargo's wheel specifications have changed over the years. The 1998 model year is highlighted.
Fitment Notes
The 1998 Ford Windstar Cargo has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Windstar Cargo appears from 1995 to 2003 (9 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
1998 Ford Windstar Cargo — Frequently Asked Questions
What is the bolt pattern for a 1998 Ford Windstar Cargo?
The 1998 Ford Windstar Cargo uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Ford Windstar Cargo have the same bolt pattern as the 1998?
The Ford Windstar Cargo uses the 5x108 pattern from 1995 through 2003. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1998 Ford Windstar Cargo?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 45mm, and a center bore of at least 63.4mm (using hub rings if larger).
Can I use spacers on my 1998 Ford Windstar Cargo?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What lug nut size does the 1998 Ford Windstar Cargo use?
The 1998 Ford Windstar Cargo uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 1998 Ford Windstar Cargo?
The factory center bore (hub bore) for the 1998 Ford Windstar Cargo is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford Windstar Cargo is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1995-2003 (9 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1998 Ford Windstar Cargo, please report it via our About page contact so we can verify and update this record.