1995 Ford Windstar Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Ford Windstar Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 Windstar Cargo — Year-Specific Fitment Context
The 1995 model year marks the beginning of the Ford Windstar Cargo's 5x108 bolt pattern era, which continued through 2003 (9 consecutive years). Wheels from any 1995–2003 Ford Windstar Cargo are cross-compatible with the 1995 model.
Ford Windstar Cargo Bolt Pattern by Year
The table below shows how the Windstar Cargo's wheel specifications have changed over the years. The 1995 model year is highlighted.
Fitment Notes
The 1995 Ford Windstar Cargo has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Windstar Cargo appears from 1995 to 2003 (9 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
1995 Ford Windstar Cargo — Frequently Asked Questions
What is the bolt pattern for a 1995 Ford Windstar Cargo?
The 1995 Ford Windstar Cargo uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Ford Windstar Cargo have the same bolt pattern as the 1995?
The Ford Windstar Cargo uses the 5x108 pattern from 1995 through 2003. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1995 Ford Windstar Cargo?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 1995 Ford Windstar Cargos use lug bolts or lug nuts?
The 1995 Windstar Cargo requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 1995 Ford Windstar Cargo use?
The 1995 Ford Windstar Cargo uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Ford fit my 1995 Windstar Cargo?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford Windstar Cargo is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1995-2003 (9 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1995 Ford Windstar Cargo, please report it via our About page contact so we can verify and update this record.