1995 Geo Metro Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Geo Metro, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 Metro — Year-Specific Fitment Context
The 1995 Geo Metro is in year 4 of 6 using the 4x114.3 pattern (1992–1997). Wheels from any 1992–1997 Geo Metro are cross-compatible with the 1995 model.
Geo Metro Bolt Pattern by Year
The table below shows how the Metro's wheel specifications have changed over the years. The 1995 model year is highlighted.
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1995 Geo Metro
For your 1995 Geo Metro, the bolt pattern is 4x114.3mm with a critical center bore of 54.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (54.1mm ID) are mandatory to prevent vibration and ensure proper load transfer. The factory offset is around 40mm; deviations beyond ±5mm may cause rubbing or bearing stress. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory wheels use a conical (60-degree) seat. Never mix seat types; improper seating can lead to wheel loss. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Geo Metro appears from 1992 to 1997 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 65-80 ft-lbs after 50 miles, then periodically check.
- ✅ Avoid wheels with offset below 35mm or above 45mm to prevent rubbing or clearance issues.
- ✅ Verify aftermarket wheels have a center bore ≥54.1mm; use hub-centric rings if larger.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Geo Metro — Frequently Asked Questions
What is the bolt pattern for a 1995 Geo Metro?
The 1995 Geo Metro uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 40mm.
What other years of Geo Metro have the same bolt pattern as the 1995?
The Geo Metro uses the 4x114.3 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1995 Geo Metro?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 54.1mm (using hub rings if larger).
What is the center bore of a 1995 Geo Metro?
The factory center bore (hub bore) for the 1995 Geo Metro is 54.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 1995 Geo Metro?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 1995 Geo Metro?
The OEM offset for the 1995 Metro is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset