1992 Honda Prelude Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Honda Prelude, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 Prelude — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Honda Prelude's 4x114.3 bolt pattern era, which continued through 1998 (7 consecutive years). Wheels from any 1992–1998 Honda Prelude are cross-compatible with the 1992 model. Across its full production run (1992–2001), the Prelude has also used: 5x114.3.
Honda Prelude Bolt Pattern by Year
The table below shows how the Prelude's wheel specifications have changed over the years. The 1992 model year is highlighted.
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1992 Honda Prelude
When selecting aftermarket wheels for your 1992 Honda Prelude, the center bore (64.1mm) is critical. Most aftermarket wheels have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 50mm; deviations of ±5mm are generally safe, but wider offsets may cause rubbing or clearance issues. Always verify lug nut compatibility: the Prelude uses 12x1.50 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts (e.g., ball seat) can lead to wheel loosening. For optimal safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Honda Prelude appears from 1992 to 2001 (10 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 64.1mm to prevent vibrations.
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving to account for settling.
- ✅ Avoid using wheels with offset below 45mm or above 55mm without test-fitting, as they may contact suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Honda Prelude — Frequently Asked Questions
What is the bolt pattern for a 1992 Honda Prelude?
The 1992 Honda Prelude uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Honda Prelude have the same bolt pattern as the 1992?
The Honda Prelude uses the 4x114.3 pattern from 1992 through 1998. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
Will wheels from another Honda fit my 1992 Prelude?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
Can I put aftermarket wheels on my 1992 Honda Prelude?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 50mm, and a center bore of at least 64.1mm (using hub rings if larger).
Why is matching the 64.1mm center bore important for the 1992 Prelude?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 1992 Honda Preludes use lug bolts or lug nuts?
The 1992 Prelude requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset