1993 Honda Prelude Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Honda Prelude, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1993 Prelude — Year-Specific Fitment Context
The 1993 Honda Prelude is in year 2 of 7 using the 4x114.3 pattern (1992–1998). Wheels from any 1992–1998 Honda Prelude are cross-compatible with the 1993 model. Across its full production run (1992–2001), the Prelude has also used: 5x114.3.
Honda Prelude Bolt Pattern by Year
The table below shows how the Prelude's wheel specifications have changed over the years. The 1993 model year is highlighted.
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1993 Honda Prelude
For your 1993 Honda Prelude, the 4x114.3 bolt pattern is shared with 1992–1998 models, but the 64.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: M12x1.5 thread pitch with a conical (60-degree) seat. Ball-seat or incorrect thread nuts can loosen or damage wheels. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Honda Prelude appears from 1992 to 2001 (10 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50 miles of driving to account for wheel settling.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 64.1mm center bore.
- ✅ Avoid spacers unless necessary; if used, ensure extended studs and proper offset to maintain safe clearance.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Honda Prelude — Frequently Asked Questions
What is the bolt pattern for a 1993 Honda Prelude?
The 1993 Honda Prelude uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Honda Prelude have the same bolt pattern as the 1993?
The Honda Prelude uses the 4x114.3 pattern from 1992 through 1998. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What lug nut size does the 1993 Honda Prelude use?
The 1993 Honda Prelude uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 64.1mm center bore important for the 1993 Prelude?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 1993 Honda?
The 1993 Prelude uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 1993 Honda Prelude?
The factory center bore (hub bore) for the 1993 Honda Prelude is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset