2026 Honda Prelude Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Honda Prelude is 5x114.3 (5x4.5"). It has a center bore of 64.1 mm, an offset range of 45-50, and utilizes 12x1.5 (Ball seat, 19mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Honda Prelude Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 64.1 mm |
| Offset Range (ET) | 45-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Prelude — Year-Specific Fitment Context
The 2026 model year is the final year of the Honda Prelude's 5x114.3 bolt pattern run (since 1999). Wheels from any 1999–2026 Honda Prelude are cross-compatible with the 2026 model. Across its full production run (1992–2026), the Prelude has also used: 4x114.3.
Honda Prelude Bolt Pattern by Year
Looking for all generations? View the complete Honda Prelude (1992–2026) Bolt Pattern & Generation Guide →
The table below shows how the Prelude's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Honda Prelude Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Honda Prelude, donor rims must match the 5x114.3 PCD and have a center bore of at least 64.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 64.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Tesla Model 3 | 64.1 mm (Exact) | 35-45 | 14x1.5 (Cone) |
| 2025 Tesla Model Y | 64.1 mm (Exact) | 35-45 | 14x1.5 (Cone) |
| 2025 Acura ADX | 64.1 mm (Exact) | 40 | 14x1.5 (Ball) |
| 2023 Acura ILX | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
| 2023 Acura Integra | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
| 2014 Acura MDX | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2015 Nissan Rogue Select | 66.1 mm | 66.1mm → 64.1mm |
40 |
| 2023 Nissan Rogue Sport | 66.1 mm | 66.1mm → 64.1mm |
40 |
| 2013 Nissan Sentra | 66.1 mm | 66.1mm → 64.1mm |
40 |
| 2025 Nissan Z | 66.1 mm | 66.1mm → 64.1mm |
20-35mm |
| 2003 Pontiac Grand Prix | 70.3 mm | 70.3mm → 64.1mm |
52 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 64.1mm |
12 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Honda Prelude — Frequently Asked Questions
What is the bolt pattern for a 2026 Honda Prelude?
The 2026 Honda Prelude uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45-50mm.
What other years of Honda Prelude have the same bolt pattern as the 2026?
The Honda Prelude uses the 5x114.3 pattern from 1999 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Do 2026 Honda Preludes use lug bolts or lug nuts?
The 2026 Prelude requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2026 Honda Prelude?
The factory center bore (hub bore) for the 2026 Honda Prelude is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2026 Honda Prelude?
The OEM offset for the 2026 Prelude is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2026 Honda Prelude?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →