2001 Honda Prelude Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Honda Prelude, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2001 Prelude — Year-Specific Fitment Context
The 2001 model year is the final year of the Honda Prelude's 5x114.3 bolt pattern run (since 1999). Wheels from any 1999–2001 Honda Prelude are cross-compatible with the 2001 model. Across its full production run (1992–2001), the Prelude has also used: 4x114.3.
Honda Prelude Bolt Pattern by Year
The table below shows how the Prelude's wheel specifications have changed over the years. The 2001 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2001 Honda Prelude
For your 2001 Honda Prelude, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use ball seats, while many aftermarket wheels require conical (60-degree) seats. Mixing seat types can lead to wheel loosening. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Honda Prelude appears from 1992 to 2001 (10 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings (64.1mm ID to wheel's bore OD) to avoid vibrations.
- ✅ Check brake caliper clearance: some 17x7.5” wheels with offset below 45mm may contact the caliper on the Prelude.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Honda Prelude — Frequently Asked Questions
What is the bolt pattern for a 2001 Honda Prelude?
The 2001 Honda Prelude uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Honda Prelude have the same bolt pattern as the 2001?
The Honda Prelude uses the 5x114.3 pattern from 1999 through 2001. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2001 Honda?
The 2001 Prelude uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2001 Honda Prelude?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Do 2001 Honda Preludes use lug bolts or lug nuts?
The 2001 Prelude requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Honda fit my 2001 Prelude?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset