1992 Honda Accord Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Honda Accord, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 Accord — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Honda Accord's 4x114.3 bolt pattern era, which continued through 2004 (13 consecutive years). Wheels from any 1992–2004 Honda Accord are cross-compatible with the 1992 model. Across its full production run (1992–2024), the Accord has also used: 5x114.3.
Honda Accord Bolt Pattern by Year
The table below shows how the Accord's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 4x114.3 | 64.1 | 50 |
| 1993 | 4x114.3 | 64.1 | 50 |
| 1994 | 4x114.3 | 64.1 | 50 |
| 1995 | 4x114.3 | 64.1 | 50 |
| 1996 | 4x114.3 | 64.1 | 50 |
| 1997 | 4x114.3 | 64.1 | 50 |
| 1998 | 4x114.3 | 64.1 | 50 |
| 1999 | 4x114.3 | 64.1 | 50 |
| 2000 | 4x114.3 | 64.1 | 50 |
| 2001 | 4x114.3 | 64.1 | 50 |
| 2002 | 4x114.3 | 64.1 | 50 |
| 2003 | 4x114.3 | 64.1 | 50 |
| 2004 | 4x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 52 |
| 2006 | 5x114.3 | 64.1 | 52 |
| 2007 | 5x114.3 | 64.1 | 52 |
| 2008 | 5x114.3 | 64.1 | 52 |
| 2009 | 5x114.3 | 64.1 | 52 |
| 2010 | 5x114.3 | 64.1 | 52 |
| 2011 | 5x114.3 | 64.1 | 52 |
| 2012 | 5x114.3 | 64.1 | 52 |
| 2013 | 5x114.3 | 64.1 | 52 |
| 2014 | 5x114.3 | 64.1 | 52 |
| 2015 | 5x114.3 | 64.1 | 52 |
| 2016 | 5x114.3 | 64.1 | 52 |
| 2017 | 5x114.3 | 64.1 | 52 |
| 2018 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x114.3 | 64.1 | 45 |
| 2020 | 5x114.3 | 64.1 | 45 |
| 2021 | 5x114.3 | 64.1 | 45 |
| 2022 | 5x114.3 | 64.1 | 45 |
| 2023 | 5x114.3 | 64.1 | 45 |
| 2024 | 5x114.3 | 64.1 | 45 |
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1992 Honda Accord
The 1992 Honda Accord uses a 4x114.3 bolt pattern with a 64.1mm center bore. When selecting aftermarket wheels, always use hub-centric rings to ensure the wheel is centered on the hub, preventing vibrations. The factory offset is 50mm; staying within ±5mm is recommended to avoid rubbing or clearance issues with suspension and fenders. Lug nuts must be 12x1.5 with a conical (60-degree) seat—never use ball-seat or shank-style nuts, as they can loosen. Always torque to 80 ft-lbs and re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Honda Accord appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Avoid wheels with a center bore larger than 64.1mm without hub rings; even 1mm difference can cause vibration.
- ✅ Verify offset before purchase: lower offset (e.g., 35mm) may require fender rolling, while higher offset (e.g., 55mm) may contact suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Honda Accord — Frequently Asked Questions
What is the bolt pattern for a 1992 Honda Accord?
The 1992 Honda Accord uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Honda Accord have the same bolt pattern as the 1992?
The Honda Accord uses the 4x114.3 pattern from 1992 through 2004. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What lug nut size does the 1992 Honda Accord use?
The 1992 Honda Accord uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 1992 Honda Accord?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 1992 Honda Accord?
Yes, but ensure the wheel spacers match the 4x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the factory wheel offset for a 1992 Honda Accord?
The OEM offset for the 1992 Accord is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset