2010 Honda Accord Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Honda Accord, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 52 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 Accord — Year-Specific Fitment Context
The 2010 Honda Accord is in year 6 of 20 using the 5x114.3 pattern (2005–2024). Wheels from any 2005–2024 Honda Accord are cross-compatible with the 2010 model. Across its full production run (1992–2024), the Accord has also used: 4x114.3.
Honda Accord Bolt Pattern by Year
The table below shows how the Accord's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 64.1 | 50 |
| 1993 | 4x114.3 | 64.1 | 50 |
| 1994 | 4x114.3 | 64.1 | 50 |
| 1995 | 4x114.3 | 64.1 | 50 |
| 1996 | 4x114.3 | 64.1 | 50 |
| 1997 | 4x114.3 | 64.1 | 50 |
| 1998 | 4x114.3 | 64.1 | 50 |
| 1999 | 4x114.3 | 64.1 | 50 |
| 2000 | 4x114.3 | 64.1 | 50 |
| 2001 | 4x114.3 | 64.1 | 50 |
| 2002 | 4x114.3 | 64.1 | 50 |
| 2003 | 4x114.3 | 64.1 | 50 |
| 2004 | 4x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 52 |
| 2006 | 5x114.3 | 64.1 | 52 |
| 2007 | 5x114.3 | 64.1 | 52 |
| 2008 | 5x114.3 | 64.1 | 52 |
| 2009 | 5x114.3 | 64.1 | 52 |
| ▸ 2010 | 5x114.3 | 64.1 | 52 |
| 2011 | 5x114.3 | 64.1 | 52 |
| 2012 | 5x114.3 | 64.1 | 52 |
| 2013 | 5x114.3 | 64.1 | 52 |
| 2014 | 5x114.3 | 64.1 | 52 |
| 2015 | 5x114.3 | 64.1 | 52 |
| 2016 | 5x114.3 | 64.1 | 52 |
| 2017 | 5x114.3 | 64.1 | 52 |
| 2018 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x114.3 | 64.1 | 45 |
| 2020 | 5x114.3 | 64.1 | 45 |
| 2021 | 5x114.3 | 64.1 | 45 |
| 2022 | 5x114.3 | 64.1 | 45 |
| 2023 | 5x114.3 | 64.1 | 45 |
| 2024 | 5x114.3 | 64.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 Honda Accord
The 2010 Honda Accord uses a 5x114.3 bolt pattern with a 64.1mm center bore. When installing aftermarket wheels, hub-centric rings are essential to match the bore and prevent vibrations. The factory offset is 52mm; aftermarket wheels should stay within ±5mm to avoid rubbing or clearance issues. Always use the correct lug nuts: M12x1.5 thread pitch with a cone (60-degree) seat. Flat or ball-seat nuts can cause wheel loosening. Re-torque after 50-100 miles. Wheels from 2005-2024 Accord models are direct fit, but verify offset and bore for non-OEM wheels.
Historical Fitment Data Reference
In our dataset, Honda Accord appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50 miles of driving.
- ✅ Avoid wheels with offset below 45mm to prevent fender rubbing.
- ✅ Use hub-centric rings with aftermarket wheels to eliminate vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Honda Accord — Frequently Asked Questions
What is the bolt pattern for a 2010 Honda Accord?
The 2010 Honda Accord uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 52mm.
What other years of Honda Accord have the same bolt pattern as the 2010?
The Honda Accord uses the 5x114.3 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Will wheels from another Honda fit my 2010 Accord?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
What does 52mm offset mean for the 2010 Accord?
An offset of 52mm means the wheel's mounting surface is 52mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Honda.
What is the center bore of a 2010 Honda Accord?
The factory center bore (hub bore) for the 2010 Honda Accord is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2010 Honda Accord?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset