1994 Honda Accord Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Honda Accord, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 Accord — Year-Specific Fitment Context
The 1994 Honda Accord is in year 3 of 13 using the 4x114.3 pattern (1992–2004). Wheels from any 1992–2004 Honda Accord are cross-compatible with the 1994 model. Across its full production run (1992–2024), the Accord has also used: 5x114.3.
Honda Accord Bolt Pattern by Year
The table below shows how the Accord's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 64.1 | 50 |
| 1993 | 4x114.3 | 64.1 | 50 |
| ▸ 1994 | 4x114.3 | 64.1 | 50 |
| 1995 | 4x114.3 | 64.1 | 50 |
| 1996 | 4x114.3 | 64.1 | 50 |
| 1997 | 4x114.3 | 64.1 | 50 |
| 1998 | 4x114.3 | 64.1 | 50 |
| 1999 | 4x114.3 | 64.1 | 50 |
| 2000 | 4x114.3 | 64.1 | 50 |
| 2001 | 4x114.3 | 64.1 | 50 |
| 2002 | 4x114.3 | 64.1 | 50 |
| 2003 | 4x114.3 | 64.1 | 50 |
| 2004 | 4x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 52 |
| 2006 | 5x114.3 | 64.1 | 52 |
| 2007 | 5x114.3 | 64.1 | 52 |
| 2008 | 5x114.3 | 64.1 | 52 |
| 2009 | 5x114.3 | 64.1 | 52 |
| 2010 | 5x114.3 | 64.1 | 52 |
| 2011 | 5x114.3 | 64.1 | 52 |
| 2012 | 5x114.3 | 64.1 | 52 |
| 2013 | 5x114.3 | 64.1 | 52 |
| 2014 | 5x114.3 | 64.1 | 52 |
| 2015 | 5x114.3 | 64.1 | 52 |
| 2016 | 5x114.3 | 64.1 | 52 |
| 2017 | 5x114.3 | 64.1 | 52 |
| 2018 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x114.3 | 64.1 | 45 |
| 2020 | 5x114.3 | 64.1 | 45 |
| 2021 | 5x114.3 | 64.1 | 45 |
| 2022 | 5x114.3 | 64.1 | 45 |
| 2023 | 5x114.3 | 64.1 | 45 |
| 2024 | 5x114.3 | 64.1 | 45 |
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1994 Honda Accord
For your 1994 Honda Accord, the 4x114.3 bolt pattern is shared with 1992–2004 models. The 64.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 50mm, but 45–55mm is acceptable. Lower offset pushes wheels outward, risking fender rub; higher offset tucks them inward, possibly contacting suspension. Always use the correct lug nuts: 12x1.5 thread pitch with a 60-degree conical seat. Ball-seat or incorrect nuts can loosen, causing wheel detachment. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Honda Accord appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50–100 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations.
- ✅ Check for caliper clearance when using wheels with offset below 45mm or above 55mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Honda Accord — Frequently Asked Questions
What is the bolt pattern for a 1994 Honda Accord?
The 1994 Honda Accord uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Honda Accord have the same bolt pattern as the 1994?
The Honda Accord uses the 4x114.3 pattern from 1992 through 2004. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
What does 50mm offset mean for the 1994 Accord?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Honda.
How do I measure the bolt pattern on my 1994 Honda?
The 1994 Accord uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 1994 Honda Accord?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 50mm, and a center bore of at least 64.1mm (using hub rings if larger).
Why is matching the 64.1mm center bore important for the 1994 Accord?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset