2006 Honda Accord Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Honda Accord, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 52 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2006 Accord — Year-Specific Fitment Context
The 2006 Honda Accord is in year 2 of 20 using the 5x114.3 pattern (2005–2024). Wheels from any 2005–2024 Honda Accord are cross-compatible with the 2006 model. Across its full production run (1992–2024), the Accord has also used: 4x114.3.
Honda Accord Bolt Pattern by Year
The table below shows how the Accord's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 64.1 | 50 |
| 1993 | 4x114.3 | 64.1 | 50 |
| 1994 | 4x114.3 | 64.1 | 50 |
| 1995 | 4x114.3 | 64.1 | 50 |
| 1996 | 4x114.3 | 64.1 | 50 |
| 1997 | 4x114.3 | 64.1 | 50 |
| 1998 | 4x114.3 | 64.1 | 50 |
| 1999 | 4x114.3 | 64.1 | 50 |
| 2000 | 4x114.3 | 64.1 | 50 |
| 2001 | 4x114.3 | 64.1 | 50 |
| 2002 | 4x114.3 | 64.1 | 50 |
| 2003 | 4x114.3 | 64.1 | 50 |
| 2004 | 4x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 52 |
| ▸ 2006 | 5x114.3 | 64.1 | 52 |
| 2007 | 5x114.3 | 64.1 | 52 |
| 2008 | 5x114.3 | 64.1 | 52 |
| 2009 | 5x114.3 | 64.1 | 52 |
| 2010 | 5x114.3 | 64.1 | 52 |
| 2011 | 5x114.3 | 64.1 | 52 |
| 2012 | 5x114.3 | 64.1 | 52 |
| 2013 | 5x114.3 | 64.1 | 52 |
| 2014 | 5x114.3 | 64.1 | 52 |
| 2015 | 5x114.3 | 64.1 | 52 |
| 2016 | 5x114.3 | 64.1 | 52 |
| 2017 | 5x114.3 | 64.1 | 52 |
| 2018 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x114.3 | 64.1 | 45 |
| 2020 | 5x114.3 | 64.1 | 45 |
| 2021 | 5x114.3 | 64.1 | 45 |
| 2022 | 5x114.3 | 64.1 | 45 |
| 2023 | 5x114.3 | 64.1 | 45 |
| 2024 | 5x114.3 | 64.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2006 Honda Accord
The 2006 Honda Accord uses a 5x114.3 bolt pattern with a 64.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to ensure the wheel is centered on the hub, preventing vibrations. The factory offset is 52mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use the correct lug nuts: M12x1.5 thread pitch with a 60-degree conical seat. Using incorrect lug nuts can lead to wheel loosening or damage. Verify that aftermarket wheels have proper load ratings and clear brake calipers. For optimal safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Honda Accord appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check that aftermarket wheels have sufficient clearance for the brake calipers, especially on V6 models.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Honda Accord — Frequently Asked Questions
What is the bolt pattern for a 2006 Honda Accord?
The 2006 Honda Accord uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 52mm.
What other years of Honda Accord have the same bolt pattern as the 2006?
The Honda Accord uses the 5x114.3 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What is the center bore of a 2006 Honda Accord?
The factory center bore (hub bore) for the 2006 Honda Accord is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 52mm offset mean for the 2006 Accord?
An offset of 52mm means the wheel's mounting surface is 52mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Honda.
Do 2006 Honda Accords use lug bolts or lug nuts?
The 2006 Accord requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2006 Honda?
The 2006 Accord uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset