1998 Honda Accord Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Honda Accord, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1998 Accord — Year-Specific Fitment Context
The 1998 Honda Accord is in year 7 of 13 using the 4x114.3 pattern (1992–2004). Wheels from any 1992–2004 Honda Accord are cross-compatible with the 1998 model. Across its full production run (1992–2024), the Accord has also used: 5x114.3.
Honda Accord Bolt Pattern by Year
The table below shows how the Accord's wheel specifications have changed over the years. The 1998 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 64.1 | 50 |
| 1993 | 4x114.3 | 64.1 | 50 |
| 1994 | 4x114.3 | 64.1 | 50 |
| 1995 | 4x114.3 | 64.1 | 50 |
| 1996 | 4x114.3 | 64.1 | 50 |
| 1997 | 4x114.3 | 64.1 | 50 |
| ▸ 1998 | 4x114.3 | 64.1 | 50 |
| 1999 | 4x114.3 | 64.1 | 50 |
| 2000 | 4x114.3 | 64.1 | 50 |
| 2001 | 4x114.3 | 64.1 | 50 |
| 2002 | 4x114.3 | 64.1 | 50 |
| 2003 | 4x114.3 | 64.1 | 50 |
| 2004 | 4x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 52 |
| 2006 | 5x114.3 | 64.1 | 52 |
| 2007 | 5x114.3 | 64.1 | 52 |
| 2008 | 5x114.3 | 64.1 | 52 |
| 2009 | 5x114.3 | 64.1 | 52 |
| 2010 | 5x114.3 | 64.1 | 52 |
| 2011 | 5x114.3 | 64.1 | 52 |
| 2012 | 5x114.3 | 64.1 | 52 |
| 2013 | 5x114.3 | 64.1 | 52 |
| 2014 | 5x114.3 | 64.1 | 52 |
| 2015 | 5x114.3 | 64.1 | 52 |
| 2016 | 5x114.3 | 64.1 | 52 |
| 2017 | 5x114.3 | 64.1 | 52 |
| 2018 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x114.3 | 64.1 | 45 |
| 2020 | 5x114.3 | 64.1 | 45 |
| 2021 | 5x114.3 | 64.1 | 45 |
| 2022 | 5x114.3 | 64.1 | 45 |
| 2023 | 5x114.3 | 64.1 | 45 |
| 2024 | 5x114.3 | 64.1 | 45 |
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1998 Honda Accord
The 1998 Honda Accord uses a 4x114.3 bolt pattern with a 64.1mm center bore and 50mm offset. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. Offset should stay within 45-55mm to avoid rubbing or clearance issues. Always use the correct lug nuts: M12x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts as they can loosen. Re-torque after 50-100 miles. Wheels from 1992-2004 Accords are direct fit, but verify offset and bore.
Historical Fitment Data Reference
In our dataset, Honda Accord appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 64.1mm to prevent vibrations and ensure proper load distribution.
- ✅ Stick to offset between 45-55mm; lower offsets may cause tire rub on fenders, higher offsets risk brake caliper clearance issues.
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving, as wheels can settle and loosen.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1998 Honda Accord — Frequently Asked Questions
What is the bolt pattern for a 1998 Honda Accord?
The 1998 Honda Accord uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Honda Accord have the same bolt pattern as the 1998?
The Honda Accord uses the 4x114.3 pattern from 1992 through 2004. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
What is the PCD for a 1998 Honda Accord?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1998 Accord, the PCD is 4x114.3.
Do 1998 Honda Accords use lug bolts or lug nuts?
The 1998 Accord requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 1998 Honda Accord?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 50mm, and a center bore of at least 64.1mm (using hub rings if larger).
What is the factory wheel offset for a 1998 Honda Accord?
The OEM offset for the 1998 Accord is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset