2009 GMC Canyon Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 GMC Canyon Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.3 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2009 Canyon Extended Cab — Year-Specific Fitment Context
The 2009 GMC Canyon Extended Cab is in year 6 of 9 using the 6x139.7 pattern (2004–2012). Wheels from any 2004–2012 GMC Canyon Extended Cab are cross-compatible with the 2009 model. Across its full production run (2004–2022), the Canyon Extended Cab has also used: 6x120.
GMC Canyon Extended Cab Bolt Pattern by Year
The table below shows how the Canyon Extended Cab's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.3 | 33 |
| 2005 | 6x139.7 | 100.3 | 33 |
| 2006 | 6x139.7 | 100.3 | 33 |
| 2007 | 6x139.7 | 100.3 | 33 |
| 2008 | 6x139.7 | 100.3 | 33 |
| ▸ 2009 | 6x139.7 | 100.3 | 33 |
| 2010 | 6x139.7 | 100.3 | 33 |
| 2011 | 6x139.7 | 100.3 | 33 |
| 2012 | 6x139.7 | 100.3 | 33 |
| 2015 | 6x120 | 66.9 | 33 |
| 2016 | 6x120 | 66.9 | 33 |
| 2017 | 6x120 | 66.9 | 33 |
| 2018 | 6x120 | 66.9 | 33 |
| 2019 | 6x120 | 66.9 | 33 |
| 2021 | 6x120 | 66.9 | 33 |
| 2022 | 6x120 | 66.9 | 33 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2009 GMC Canyon Extended Cab
For your 2009 GMC Canyon Extended Cab, the bolt pattern is 6x139.7mm with a center bore of 100.3mm. When selecting aftermarket wheels, ensure they match the bolt pattern and have a center bore of at least 100.3mm; use hub-centric rings to avoid vibration if the bore is larger. The factory offset is 33mm; staying within ±5mm is recommended to prevent rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (cone seat for most aftermarket wheels; verify with your wheel supplier). Improper lug nut seating can lead to wheel loosening. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, GMC Canyon Extended Cab appears from 2004 to 2022 (16 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 100.3mm center bore.
- ✅ Avoid wheels with offset below 28mm or above 38mm to prevent rubbing on suspension or body.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 GMC Canyon Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2009 GMC Canyon Extended Cab?
The 2009 GMC Canyon Extended Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.3mm and the offset is 33mm.
What other years of GMC Canyon Extended Cab have the same bolt pattern as the 2009?
The GMC Canyon Extended Cab uses the 6x139.7 pattern from 2004 through 2012. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2009 GMC Canyon Extended Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 33mm, and a center bore of at least 100.3mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2009 GMC Canyon Extended Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2009 GMC?
The 2009 Canyon Extended Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another GMC fit my 2009 Canyon Extended Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.3mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset