2010 GMC Canyon Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 GMC Canyon Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.3 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 Canyon Extended Cab — Year-Specific Fitment Context
The 2010 GMC Canyon Extended Cab is in year 7 of 9 using the 6x139.7 pattern (2004–2012). Wheels from any 2004–2012 GMC Canyon Extended Cab are cross-compatible with the 2010 model. Across its full production run (2004–2022), the Canyon Extended Cab has also used: 6x120.
GMC Canyon Extended Cab Bolt Pattern by Year
The table below shows how the Canyon Extended Cab's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.3 | 33 |
| 2005 | 6x139.7 | 100.3 | 33 |
| 2006 | 6x139.7 | 100.3 | 33 |
| 2007 | 6x139.7 | 100.3 | 33 |
| 2008 | 6x139.7 | 100.3 | 33 |
| 2009 | 6x139.7 | 100.3 | 33 |
| ▸ 2010 | 6x139.7 | 100.3 | 33 |
| 2011 | 6x139.7 | 100.3 | 33 |
| 2012 | 6x139.7 | 100.3 | 33 |
| 2015 | 6x120 | 66.9 | 33 |
| 2016 | 6x120 | 66.9 | 33 |
| 2017 | 6x120 | 66.9 | 33 |
| 2018 | 6x120 | 66.9 | 33 |
| 2019 | 6x120 | 66.9 | 33 |
| 2021 | 6x120 | 66.9 | 33 |
| 2022 | 6x120 | 66.9 | 33 |
Fitment Notes
The 2010 GMC Canyon Extended Cab has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, GMC Canyon Extended Cab appears from 2004 to 2022 (16 model years).
Across model years, this model appears with 2 bolt patterns (6x120, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
2010 GMC Canyon Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 GMC Canyon Extended Cab?
The 2010 GMC Canyon Extended Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.3mm and the offset is 33mm.
What other years of GMC Canyon Extended Cab have the same bolt pattern as the 2010?
The GMC Canyon Extended Cab uses the 6x139.7 pattern from 2004 through 2012. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Do 2010 GMC Canyon Extended Cabs use lug bolts or lug nuts?
The 2010 Canyon Extended Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2010 GMC Canyon Extended Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Canyon Extended Cab, the PCD is 6x139.7.
What is the factory wheel offset for a 2010 GMC Canyon Extended Cab?
The OEM offset for the 2010 Canyon Extended Cab is typically around 33mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2010 GMC Canyon Extended Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
GMC Canyon Extended Cab has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2004-2022 (16 model years).
- Observed bolt-pattern variants: 2 (6x120, 6x139.7).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2010 GMC Canyon Extended Cab, please report it via our About page contact so we can verify and update this record.