2007 GMC Canyon Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 GMC Canyon Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.3 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2007 Canyon Extended Cab — Year-Specific Fitment Context
The 2007 GMC Canyon Extended Cab is in year 4 of 9 using the 6x139.7 pattern (2004–2012). Wheels from any 2004–2012 GMC Canyon Extended Cab are cross-compatible with the 2007 model. Across its full production run (2004–2022), the Canyon Extended Cab has also used: 6x120.
GMC Canyon Extended Cab Bolt Pattern by Year
The table below shows how the Canyon Extended Cab's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.3 | 33 |
| 2005 | 6x139.7 | 100.3 | 33 |
| 2006 | 6x139.7 | 100.3 | 33 |
| ▸ 2007 | 6x139.7 | 100.3 | 33 |
| 2008 | 6x139.7 | 100.3 | 33 |
| 2009 | 6x139.7 | 100.3 | 33 |
| 2010 | 6x139.7 | 100.3 | 33 |
| 2011 | 6x139.7 | 100.3 | 33 |
| 2012 | 6x139.7 | 100.3 | 33 |
| 2015 | 6x120 | 66.9 | 33 |
| 2016 | 6x120 | 66.9 | 33 |
| 2017 | 6x120 | 66.9 | 33 |
| 2018 | 6x120 | 66.9 | 33 |
| 2019 | 6x120 | 66.9 | 33 |
| 2021 | 6x120 | 66.9 | 33 |
| 2022 | 6x120 | 66.9 | 33 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2007 GMC Canyon Extended Cab
For your 2007 GMC Canyon Extended Cab, the bolt pattern is 6x139.7mm with a center bore of 100.3mm. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibration. The offset is critical at 33mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) or ball seat to match the wheel. Improper seating can lead to wheel loss. Verify that wheels from 2004–2012 Canyon models are compatible, but avoid 6x120 pattern wheels from later years.
Historical Fitment Data Reference
In our dataset, GMC Canyon Extended Cab appears from 2004 to 2022 (16 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Check for caliper clearance when using wheels with offset below 25mm or above 40mm.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 GMC Canyon Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2007 GMC Canyon Extended Cab?
The 2007 GMC Canyon Extended Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.3mm and the offset is 33mm.
What other years of GMC Canyon Extended Cab have the same bolt pattern as the 2007?
The GMC Canyon Extended Cab uses the 6x139.7 pattern from 2004 through 2012. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the center bore of a 2007 GMC Canyon Extended Cab?
The factory center bore (hub bore) for the 2007 GMC Canyon Extended Cab is 100.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another GMC fit my 2007 Canyon Extended Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.3mm.
Do 2007 GMC Canyon Extended Cabs use lug bolts or lug nuts?
The 2007 Canyon Extended Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2007 GMC?
The 2007 Canyon Extended Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset