2008 GMC Canyon Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 GMC Canyon Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.3 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2008 Canyon Extended Cab — Year-Specific Fitment Context
The 2008 GMC Canyon Extended Cab is in year 5 of 9 using the 6x139.7 pattern (2004–2012). Wheels from any 2004–2012 GMC Canyon Extended Cab are cross-compatible with the 2008 model. Across its full production run (2004–2022), the Canyon Extended Cab has also used: 6x120.
GMC Canyon Extended Cab Bolt Pattern by Year
The table below shows how the Canyon Extended Cab's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.3 | 33 |
| 2005 | 6x139.7 | 100.3 | 33 |
| 2006 | 6x139.7 | 100.3 | 33 |
| 2007 | 6x139.7 | 100.3 | 33 |
| ▸ 2008 | 6x139.7 | 100.3 | 33 |
| 2009 | 6x139.7 | 100.3 | 33 |
| 2010 | 6x139.7 | 100.3 | 33 |
| 2011 | 6x139.7 | 100.3 | 33 |
| 2012 | 6x139.7 | 100.3 | 33 |
| 2015 | 6x120 | 66.9 | 33 |
| 2016 | 6x120 | 66.9 | 33 |
| 2017 | 6x120 | 66.9 | 33 |
| 2018 | 6x120 | 66.9 | 33 |
| 2019 | 6x120 | 66.9 | 33 |
| 2021 | 6x120 | 66.9 | 33 |
| 2022 | 6x120 | 66.9 | 33 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2008 GMC Canyon Extended Cab
For your 2008 GMC Canyon Extended Cab, the 6x139.7 bolt pattern is shared with 2004–2012 models, ensuring cross-compatibility. The center bore is 100.3mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is critical: stock is 33mm, but a range of 25–40mm is acceptable; deviations may cause rubbing or clearance issues. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen and cause wheel separation. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, GMC Canyon Extended Cab appears from 2004 to 2022 (16 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50–100 miles of driving.
- ✅ Aftermarket wheels may require hub-centric rings (bore 100.3mm) to avoid vibrations.
- ✅ Avoid wheels with offset below 25mm or above 40mm to prevent rubbing or suspension damage.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 GMC Canyon Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2008 GMC Canyon Extended Cab?
The 2008 GMC Canyon Extended Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.3mm and the offset is 33mm.
What other years of GMC Canyon Extended Cab have the same bolt pattern as the 2008?
The GMC Canyon Extended Cab uses the 6x139.7 pattern from 2004 through 2012. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Will wheels from another GMC fit my 2008 Canyon Extended Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.3mm.
What is the center bore of a 2008 GMC Canyon Extended Cab?
The factory center bore (hub bore) for the 2008 GMC Canyon Extended Cab is 100.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2008 GMC?
The 2008 Canyon Extended Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2008 GMC Canyon Extended Cab?
The OEM offset for the 2008 Canyon Extended Cab is typically around 33mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset