2021 GMC Canyon Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 GMC Canyon Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.9 mm |
| Offset (ET) | 33 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2021 Canyon Extended Cab — Year-Specific Fitment Context
The 2021 GMC Canyon Extended Cab is in year 7 of 8 using the 6x120 pattern (2015–2022). Wheels from any 2015–2022 GMC Canyon Extended Cab are cross-compatible with the 2021 model. Across its full production run (2004–2022), the Canyon Extended Cab has also used: 6x139.7.
GMC Canyon Extended Cab Bolt Pattern by Year
The table below shows how the Canyon Extended Cab's wheel specifications have changed over the years. The 2021 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.3 | 33 |
| 2005 | 6x139.7 | 100.3 | 33 |
| 2006 | 6x139.7 | 100.3 | 33 |
| 2007 | 6x139.7 | 100.3 | 33 |
| 2008 | 6x139.7 | 100.3 | 33 |
| 2009 | 6x139.7 | 100.3 | 33 |
| 2010 | 6x139.7 | 100.3 | 33 |
| 2011 | 6x139.7 | 100.3 | 33 |
| 2012 | 6x139.7 | 100.3 | 33 |
| 2015 | 6x120 | 66.9 | 33 |
| 2016 | 6x120 | 66.9 | 33 |
| 2017 | 6x120 | 66.9 | 33 |
| 2018 | 6x120 | 66.9 | 33 |
| 2019 | 6x120 | 66.9 | 33 |
| ▸ 2021 | 6x120 | 66.9 | 33 |
| 2022 | 6x120 | 66.9 | 33 |
6x120 Pattern Context
This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x120:
Expert Buying Guide for 2021 GMC Canyon Extended Cab
For your 2021 GMC Canyon Extended Cab, the 6x120 bolt pattern and 66.9mm center bore are critical. Aftermarket wheels must match the bore exactly or use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. The factory offset is 33mm; deviations affect scrub radius and clearance. Stick within ±5mm to avoid rubbing or suspension issues. Always use 14x1.5 lug nuts with proper seat type (conical/60-degree for most aftermarket wheels; factory uses ball seat). Mismatched seats cause loose wheels and potential failure. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, GMC Canyon Extended Cab appears from 2004 to 2022 (16 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric rings are installed to match the 66.9mm bore.
- ✅ Avoid wheels with offset below 28mm or above 38mm to prevent rubbing on suspension or body.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 GMC Canyon Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2021 GMC Canyon Extended Cab?
The 2021 GMC Canyon Extended Cab uses a 6x120 bolt pattern (also called lug pattern or PCD). The center bore is 66.9mm and the offset is 33mm.
What other years of GMC Canyon Extended Cab have the same bolt pattern as the 2021?
The GMC Canyon Extended Cab uses the 6x120 pattern from 2015 through 2022. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2021 GMC?
The 2021 Canyon Extended Cab uses a 6x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2021 GMC Canyon Extended Cab?
The factory center bore (hub bore) for the 2021 GMC Canyon Extended Cab is 66.9mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2021 GMC Canyon Extended Cab?
The OEM offset for the 2021 Canyon Extended Cab is typically around 33mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2021 GMC Canyon Extended Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset