2011 GMC Canyon Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 GMC Canyon Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.3 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2011 Canyon Regular Cab — Year-Specific Fitment Context
The 2011 GMC Canyon Regular Cab is in year 8 of 9 using the 6x139.7 pattern (2004–2012). Wheels from any 2004–2012 GMC Canyon Regular Cab are cross-compatible with the 2011 model.
GMC Canyon Regular Cab Bolt Pattern by Year
The table below shows how the Canyon Regular Cab's wheel specifications have changed over the years. The 2011 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2011 GMC Canyon Regular Cab
The 2011 GMC Canyon Regular Cab uses a 6x139.7 bolt pattern with a 100.3mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; the factory spec is 33mm, and deviations beyond ±10mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the thread pitch is 12x1.5, and the seat type must match (cone seat for factory wheels; aftermarket wheels may require ball or conical seats). Failure to use correct lug nuts can lead to wheel detachment. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, GMC Canyon Regular Cab appears from 2004 to 2012 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 100.3mm without hub-centric rings; otherwise, vibrations may occur.
- ✅ Check for brake caliper clearance if using wheels with offset less than 23mm or greater than 43mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 GMC Canyon Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2011 GMC Canyon Regular Cab?
The 2011 GMC Canyon Regular Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.3mm and the offset is 33mm.
What other years of GMC Canyon Regular Cab have the same bolt pattern as the 2011?
The GMC Canyon Regular Cab uses the 6x139.7 pattern from 2004 through 2012. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the factory wheel offset for a 2011 GMC Canyon Regular Cab?
The OEM offset for the 2011 Canyon Regular Cab is typically around 33mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2011 GMC Canyon Regular Cab use?
The 2011 GMC Canyon Regular Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another GMC fit my 2011 Canyon Regular Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.3mm.
Can I use spacers on my 2011 GMC Canyon Regular Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 100.3mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset