2011 GMC Sierra 2500 HD Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 GMC Sierra 2500 HD Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x180 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 44 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2011 Sierra 2500 HD Regular Cab — Year-Specific Fitment Context
The 2011 model year marks the beginning of the GMC Sierra 2500 HD Regular Cab's 8x180 bolt pattern era, which continued through 2024 (14 consecutive years). Wheels from any 2011–2024 GMC Sierra 2500 HD Regular Cab are cross-compatible with the 2011 model. Note: the 2010 model used a different pattern (8x165.1), so its wheels are NOT interchangeable with the 2011. Across its full production run (1999–2024), the Sierra 2500 HD Regular Cab has also used: 8x165.1.
GMC Sierra 2500 HD Regular Cab Bolt Pattern by Year
The table below shows how the Sierra 2500 HD Regular Cab's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x165.1 | 116.7 | 20-40 |
| 2000 | 8x165.1 | 116.7 | 20-40 |
| 2001 | 8x165.1 | 116.7 | 20-40 |
| 2002 | 8x165.1 | 116.7 | 20-40 |
| 2003 | 8x165.1 | 116.7 | 20-40 |
| 2004 | 8x165.1 | 116.7 | 20-40 |
| 2005 | 8x165.1 | 116.7 | 20-40 |
| 2006 | 8x165.1 | 116.7 | 20-40 |
| 2007 | 8x165.1 | 116.7 | 20-40 |
| 2008 | 8x165.1 | 116.7 | 20-40 |
| 2009 | 8x165.1 | 116.7 | 20-40 |
| 2010 | 8x165.1 | 116.7 | 20-40 |
| ▸ 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2023 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x180 Pattern Context
This bolt pattern appears on 247 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 8x180:
Expert Buying Guide for 2011 GMC Sierra 2500 HD Regular Cab
For your 2011 GMC Sierra 2500 HD Regular Cab, the 8x180 bolt pattern is shared with 2011–2024 models, but the 124.9mm center bore demands hub-centric rings for aftermarket wheels to prevent vibration. The 44mm offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.5) and seat type—factory uses cone seat, but aftermarket wheels may require ball seat or shank-style nuts. Mismatched lug hardware risks wheel loss. Stick to OEM-spec wheels or use proper adapters.
Historical Fitment Data Reference
In our dataset, GMC Sierra 2500 HD Regular Cab appears from 1999 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ Avoid wheels from 2010 or earlier models (8x165.1 pattern) as they are not interchangeable.
- ✅ When using aftermarket wheels, confirm hub-centric rings are installed to match the 124.9mm center bore.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 GMC Sierra 2500 HD Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2011 GMC Sierra 2500 HD Regular Cab?
The 2011 GMC Sierra 2500 HD Regular Cab uses a 8x180 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 44mm.
What other years of GMC Sierra 2500 HD Regular Cab have the same bolt pattern as the 2011?
The GMC Sierra 2500 HD Regular Cab uses the 8x180 pattern from 2011 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I use 2010 GMC Sierra 2500 HD Regular Cab wheels on a 2011?
No. The 2010 Sierra 2500 HD Regular Cab used a 8x165.1 bolt pattern, which differs from the 2011's 8x180. They are not interchangeable.
What lug nut size does the 2011 GMC Sierra 2500 HD Regular Cab use?
The 2011 GMC Sierra 2500 HD Regular Cab uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2011 GMC Sierra 2500 HD Regular Cabs use lug bolts or lug nuts?
The 2011 Sierra 2500 HD Regular Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another GMC fit my 2011 Sierra 2500 HD Regular Cab?
Only if they share the exact same 8x180 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset